Ford XS8Z-9034-AL
Filler Neck

The first step to service the fuel filler hose begins with removing the fuel tank filler cap and right-hand rear wheel nut loosening. The technician should support the vehicle while raising it and proceed to remove the wheel and splash shield. First step is to extract the fuel tank after which you should lower the rear suspension crossmember partially. The fuel vapor tube needs disconnection from the fuel filler pipe by first cutting away cable ties followed by removal of clips and vapor tube separation. First uninstall the lower bolt and center bolt from the fuel filler pipe before you disambiguate the ground cable and remove the fuel filler pipe. The installation process should be performed in reverse order yet require strict observance of rules for flammable vapors at all times.

The fuel filler hose service requires removing the fuel tank filler cap followed by right-hand rear wheel nut loosening. Lift and stabilize the vehicle next remove the wheel together with the fender splash shield. The first step involves removing the fuel tank and performing partial suspension crossmember descent. Service the fuel vapor tube requires you to separate it from the fuel filler pipe through cable tie cutting and tube disconnection from the clip while also removing the vapor tube from its connection. First disconnect the fuel filler pipe ground cubic and remove the lower bolt and center bolt of the fuel filler pipe before separating the fuel filler pipe itself from the vehicle. Safety must be prioritized throughout installation along with following the reversed removal process to avoid exposure to highly flammable vapors that are present near fuel-related components.

Remove the fuel tank filler cap and loosen the right-hand rear wheel nuts.