Ford 6U2Z-10V346-EGRM
Alternator

First disconnect the battery as the first step to service and repair the alternator. Secondly detach the air cleaner outlet pipe assembly. Remove tension on the accessory drive belt while extracting the generator pulley belt. Begin by removing the bolts which fasten the generator bracket and pull off the generator electrical connections using caution because the new connector requires a press-to-release tab to prevent connector or harness damage. Start by removing the B+ cable nut together with its cable. After that disconnect the electrical connector. The generator installation requires loosening lower screws before generator removal. The procedure to reinstall the part follows the steps of removal in the reverse order.

Before servicing the alternator users must disconnect the battery. The air cleaner outlet pipe assembly must be taken off next. Free the accessory drive belt while lowering tension then remove it from around the generator pulley. The service and repair of the alternator begins with removing the generator bracket bolts followed by disconnecting generator electrical connections while being cautious of the new connector press-to-release tab. First disconnect the B+ cable nut and cable after which you must disconnect the electrical connector. After unscrewing its lower bolts you can remove the generator unit. After properly reversing all previous steps you can reinstall the generator component.

Begin by disconnecting the battery.

Remove the bolts securing the generator bracket and position the generator aside.