Ford F87Z-15K601-AA
Transmitter

A successful programming operation for all Remote Keyless Entry transmitters requires doing it at the same time. The programming process starts when you use the RKE transmitter along with RKE keypad (if available) or door lock control switch to electronically unlock the vehicle with the driver door open. The key needs to transition from OFF to RUN for eight counting sequences during a ten-second period with the last count at RUN to access program mode. Successful program activation will cause the vehicle doors to automatically lock and unlock. Each RKE transmitter must have its button pressed during the twenty-second time period to verify programming success through door lock and unlock functions. Leave the door locks idle for some time before trying to press the button once more. A verification is needed to confirm less than the maximum allowable number of RKE transmitters exist. The programming mode closes under these conditions: turning off the key or when more than twenty seconds have passed after starting programming mode or when all possible RKE transmitters have been programmed.

Up to four keyfobs can be programmed.

Wait a few seconds and try again. If there is still no response, check for inspection and verification, ensuring that the maximum number of remote transmitters and wireless keyless entry keypads is not exceeded.