Ford 3C7Z-7804105-CAC
Sunvisor, Driver Side

It is essential to remove and toss the screws from the sun visor while replacing the gaskets since you took off the visor assembly. Use enough force to remove the sun visor from the vehicle after which you must disconnect the electrical connector. Remove the gasket used on sun visors that are being thrown out. When servicing the rear rivet nut a headliner detachment procedure becomes necessary. Check the specifications if the hole shows deviations from the standard. The process to install a new sun visor retaining screw starts with flattening or drilling both the screw head and rivet nut before punching the rivet nut through the hole to fit a new rivet nut. Installation begins with surface cleaning of sun visor and roof panel before wrapping the electrical connector with anti-rattle tape and completing installation with the opposite removal steps alongside the addition of a new sun visor gasket.

Apply adequate force to detach the sun visor (3604118) from the vehicle and disconnect the electrical connector.

Remove and discard the screws, ensuring to install new sun visor gaskets since the visor has been removed.