My Garage
Cart
Make sure this part fits

Ford 6L8Z-19D850-AB
A/C Line

2005-2007 Ford 6L8Z19D850AB

Customer Questions & Expert Answers (9)
Ford 6L8Z-19D850-AB A/C Line
  • Part Description
    Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
  • Base No.
    19D850
  • Replaces
    6L8Z-19D850-AA, 5L8Z-19D850-EA, YF-3136
  • Manufacturer
    Ford
Make sure this part fits
$165.68 MSRP: $272.62
You Save: $106.94 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.19D850
    Manufacturer Part Number6L8Z-19D850-AB
    Part DescriptionTube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
    Other NamesDischarge Line; A/C Tube
    Item Dimensions8.6 x 45.5 x 21.0 inches
    Item Weight5.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces6L8Z-19D850-AA, 5L8Z-19D850-EA, YF-3136
    ManufacturerFord
    SKU6L8Z-19D850-AB
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Ford EscapeLimited, XLS, XLT, XLT No Boundaries, XLT Sport6 Cyl 3.0 L GAS
    2005-2007 Mercury MarinerBase, Convenience, Luxury, Premier4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 6L8Z-19D850-AB the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6L8Z-19D850-AB fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the A/C Hose for the evaporator inlet line on Mercury Mariner? Posted by Customer
    A:
    The service process for the evaporator inlet line starts with recovering all refrigerant from the system. Service of the evaporator inlet line starts by loosening nuts to disconnect fittings before removing and discarding O-rings. Tighten all evaporator inlet line fittings up to 10 Nm (89 lb-in) when you install the new components. To install the evaporator inlet line you must first replace the existing O-ring seals using seals that received mineral oil lubrication and then proceed with reconnection of all separated A/C components. The installation of the line requires reversing the removal steps while finishing the procedure through refrigerant system charging and leak testing.
    Posted by FordPartsDeal Specialist
    Q:
    How do you disconnect the condenser core peanut fitting for the 2005 Ford Escape? Posted by Customer
    A:
    Remove its nut, which should also be tightened to 8 Nm (71 lb-in) during reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done during the installation of the new fitting for the 2007 Ford Escape? Posted by Customer
    A:
    Ensure to tighten the new fitting to 8 Nm (71 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after installation for the 2006 Ford Escape? Posted by Customer
    A:
    Evacuate, leak test, and charge the refrigerant system as needed.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done with the compressor manifold and tube assembly bracket for the 2007 Mercury Mariner? Posted by Customer
    A:
    Remove the two nuts securing the bracket and tighten them to 8 Nm (71 lb-in) during installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done before reconnecting any A/C fittings for the 2005 Mercury Mariner? Posted by Customer
    A:
    Install new O-ring seals lubricated with clean mineral oil.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after completing the disconnection and installation for the 2005 Mercury Mariner? Posted by Customer
    A:
    Reverse the removal procedure for installation and perform a charge and leak test on the refrigerant system.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after positioning the 2006 Mercury Mariner? Posted by Customer
    A:
    Recover the refrigerant, then remove the front bumper cover and the right-hand splash shield.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 6L8Z-19D850-AB, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 6L8Z-19D850-AB A/C Line. It is sometimes referred to as Ford A/C Hose. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 6L8Z19D850AB A/C Line. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery