My Garage
Cart
Make sure this part fits

Ford 7L2Z-19835-LA
Liquid Line, Front

2006-2010 Ford 7L2Z19835LA

Customer Questions & Expert Answers (9)
Ford 7L2Z-19835-LA Liquid Line, Front
  • Part Description
    Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose
  • Base No.
    19835B
  • Position
    Front
  • Replaces
    6L2Z-19835-LA
  • Manufacturer
    Ford
Make sure this part fits
$70.50 MSRP: $97.54
You Save: $27.04 (28%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2010 Ford ExplorerEddie Bauer, Limited, XLS, XLT6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    2006-2010 Mercury MountaineerBase, Convenience, Luxury, Premier6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you verify if 7L2Z-19835-LA is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 7L2Z-19835-LA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done after removing the six auxiliary line brackets for the 2008 Ford Explorer? Posted by Customer
    A:
    Take out the front auxiliary evaporator outlet and inlet lines.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after disconnecting the A/C pressure transducer for the 2007 Ford Explorer? Posted by Customer
    A:
    Remove the condenser inlet fitting nut and disconnect the fitting, discarding the O-ring seal and tightening it to 8 Nm (71 lb-in) upon reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after recovering the refrigerant for the 2009 Ford Explorer? Posted by Customer
    A:
    Remove the compressor suction fitting nut to disconnect the fitting, discarding the O-ring seal and gasket seal, and ensure to tighten the fitting to 15 Nm (133 lb-in) upon installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    How should the installation be completed for the 2006 Ford Explorer? Posted by Customer
    A:
    Reverse the removal procedure, install new O-ring seals, and lubricate the refrigerant system with the correct amount of clean PAG oil.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after positioning for the 2007 Mercury Mountaineer? Posted by Customer
    A:
    Recover the refrigerant.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done with the condenser outlet fitting nut for the 2008 Mercury Mountaineer? Posted by Customer
    A:
    Disconnect the fitting nut, remove the fitting, discard the O-ring seal, and tighten the fitting to 8 Nm (71 lb-in) upon reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the procedure for removing the condenser-to-evaporator line for the 2006 Mercury Mountaineer? Posted by Customer
    A:
    Remove the front portion of the condenser-to-evaporator line, then remove the A/C line bracket nut at the dash panel and detach the bracket, tightening it to 6 Nm (53 lb-in) during reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the torque specification for tightening the fittings during reinstallation for the 2009 Mercury Mountaineer? Posted by Customer
    A:
    Ensure the fittings are tightened to 8 Nm (71 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Liquid Line, Front 7L2Z-19835-LA Designed for Proper Fit and Performance

The Ford part 7L2Z-19835-LA Liquid Line, Front as a genuine Ford A/C Hose component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 7L2Z-19835-LA Liquid Line, Front is used with Ford Explorer vehicles and Mercury Mountaineer models. The original Ford part will bear the manufacturer part number: 7L2Z-19835-LA and where it is made at Ford. It has been specifically developed to fit the Front and has the code: 19835B.
This component has dimensions of 40.8 x 21.2 x 11.4 inches and its weight is approximately 5.40 Pounds. The part 7L2Z19835LA is available in New condition while meeting the standards of the product rating. The Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 7L2Z-19835-LA can be known as Hose & Tube Assembly, and it replaces 6L2Z-19835-LA. The inventory reference for this item is SKU: 7L2Z-19835-LA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.