1985 Mercury Grand Marquis Engine Parts & Mounts, Timing, Lubrication System

Part Notes: (AB-122-D)-BOLT (FRONT COVER TO BLOCK) - M8 X 1.25 X 25 (METRIC)

Part Notes: USE TO PLUG HOLES IN 6010 OR 6049-1/4"-18

Part Notes: (PP-73-A)-PLUG (REAR HOLES IN BLOCK)-CUP TYPE-3/4"
(PP-73-A)-PLUG (REAR HOLES IN BLOCK)-CUP-3/4"

Part Notes: (WW-123-KJ) Stud (pump to frt. cvr.) 3/8"-16-5/16-18 x 3.5"

Part Notes: (WW-123-KK) STUD (PUMP TO BLK.) 3/8"-16-5/16-18 X 5.4

Part Notes: (NN-124-E)-PIN (FRONT COVER TO BLOCK)-1/2" O.D.- 7/16" I.D. X 9/16" LONG-SPLIT DOWEL
(NN-124-E)-PIN (FRONT COVER TO BLOCK)-1/2" OD- 7/16" ID X 9/16" LONG-SPLIT DOWEL

Part Notes: (WW-123-KL) Stud (pump to cvr. to blk.) 3/8"-16-5/16-18 x 6.6

Part Notes: (WW-135-C) Stud-(6019 to 6010)-5/16-18x3.09

Part Notes: (CYL. HEAD HOLES)-CUP TYPE 1.50" O.D.
CYL. HEAD REAR-(1.50")-CUP
Cup- 1.50" OD -core holes in block
HOLES IN BLOCK AND HEAD - CUP TYPE - STD. 1.50" O.D.
PLUG CORE HOLES IN BLK OR HD.-STD.-1.50" O.D.

Part Notes: (AW-30-D) STUD & WASHER (MANIFOLD TO HEAD) M8 X 1.25 X 1.25 X 63.0 HEX SHOULDER

Part Notes: MAY ALSO BE INCL. WITH INDIVIDUAL 6051 GASKET DOES NOT REQ.N801242-S WASHER

Part Notes: .25MM U/S I.D.-UPPER THRUST, COMPLETE SERVICE KIT 3.8 S/C, COMPLETE SERVICE KIT 3.8 EXCLUDES S/C

Part Notes: CONNECTOR - STEEL FOR 5/8" HOSE - CUT TO FIT

Part Notes: (WW-98-AH)-STUD (EXHAUST MANIFOLD TO INLET PIPE) 7/16"-14-14 X 2" HEX SHOULDER

Part Notes: ALL ``FROM 3/21/84"
H/O W/P/C OPTION ``FROM 3/21/84"

Part Notes: FOR P.C.V.
Used in RH rocker arm cover

Part Notes: ALL MTX , CLUTCH TO FLYWHEEL
CLUTCH TO FLYWHEEL
CLUTCH TO FLYWHEEL , MG M/T
CYL BLOCK TO FLYWHEEL HSG

Part Notes: MA WITH CAST IRON INTAKE MANIFOLE , SPACER TO MANFLD.
MG WITH CAST IRON INTAKE MANIFOLD , SPACER TO MANFLD.

Part Notes: (AB-117-D) bolt (tube to cyl. head) - M6 x 12mm

Part Notes: (CYLINDER HEAD HOLES)-EXP. CUP 18.22 X 6MM
USED IN CYL. BLOCK-REPLS. 6767 STRAIGHT CONN.

Part Notes: VALVE - EGR (LESS EVP SENSOR)
VALVE ASSY. EGR (INCLUDES EVP SENSOR)

Part Notes: LONG-M11X1.50X101.8 METRIC-USE FOR SERV. OF 97.8MM BOLT.

Part Notes: MA WITHOUT EEC IV , MOTORCRAFT PART NUMBERS DY-184C & DY-184CDP WITH ENGINEERING NO. STAMPED E8PF 12A199-AB ARE TO BE USED ON 4, 6 & 8 CYL. APPLS. PARTS WITH ENGINEERING NO. STAMPED E8PF 12A199-AA ARE USED ONLY ON 4 & 6 APPLS.
MG WITHOUT EEC IV , MOTORCRAFT PART NUMBERS DY-184C & DY-184CDP WITH ENGINEERING NO. STAMPED E8PF 12A199-AB ARE TO BE USED ON 4, 6 & 8 CYL. APPLS. PARTS WITH ENGINEERING NO. STAMPED E8PF 12A199-AA ARE USED ONLY ON 4 & 6 APPLS.