1996 Ford Taurus Senders

Part Notes: Strap type retainer for wire bundle - 7.2mm (1/4") dia. stem, 15mm (5/8") mushroom head, 9.25mm (1/4") long serrated stem, 130mm (4 3/4") strap, includes 10 straps

Part Notes: (II-191-Q) - fitting (hose connector tee - 3 way) - 3/16" x 3/16" x 3/16" x 1 7/16" long (nylon)

Part Notes: (II-187-AJ)-elbow-3/16" x 3/16" Tube 90 degree

Part Notes: 12V , Stud; M8x1.25x104.3mm; attaches water pump & front cover to block

Part Notes: 24V , Bolt; M8 x 51mm, Attaches front cover to block; Positions 4, 10, 13, 14, 15 & 16

Part Notes: ENG.SZ.: 6 , Tube to bottom of core. Top tube not serviced., 24V

Part Notes: Service plug may differ from original, Flex Fuel-(Methanol/Ethanol)

Part Notes: Service plug may differ from original, 4V

Part Notes: Rectangular connector with 2 flat pins, Flex Fuel-(Methanol/Ethanol)
Rectangular connector with 2 flat pins. For OHV vehicles, refer to 18599 for the fitting that the sensor goes to. For DOHC vehicles refer to 8548 for the fitting that the sensor goes to.

Part Notes: Tube only - Does not include sensors-No. 2

Part Notes: Retainer - push pin type - 20mm serrated pin with 60mm x 10mm wing - general use for wiring to sheet metal - use with electrical tape - incl. 10 retainers

Part Notes: Replacement hose for coolant system flush kit used on TSB 01-11-06; F7DH-8548-AA,-AB - hose only, 12 valve-exc. Flex Fuel

Part Notes: Tube only - F7DZ-8555-CA asy. includes heater tube(18B402), engine thermostat tube(9K474)), water temp sender(10884), seal, plug and the F6DZ-8548-BA(water crossover tube)

Part Notes: ENG.SZ.: 6 , Hose from 18B402 asy. to water pump. , 12V