2001 Ford Focus Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2001 Ford Focus

• Q: How to remove and replace the Air Bag Control Module safely on 2001 Ford Focus?

  A: In order to remove the Air Bag Control Module, empty the backup power waiting one minute after the battery has been disconnected. Do not use key code savers and probing connectors. Get out vehicle information, remove battery, and delete the console. Be very careful when removing the module and setting up the new one after the installation with a diagnostic tool.
• Q: What checklist should be completed to ensure the proper functioning of the Airbag system after diagnosis and repair on 2001 Ford Focus?

  A: In order to get the air bag system to work again after diagnosis and repair, the following checklist should be completed: ensure that the air bag sliding contact connector at the steering column is attached, the air bag modules are attached, the safety belt retractor pretensioners, the RCM, and the vehicle battery are all connected.
• Q: How to Remove and Replace the Clock Spring Assembly or Spiral Cable on 2001 Ford Focus?

  A: In order to change the Clock Spring assembly, take care to ensure that the road wheels are straight and remove the battery. Take out driver air bag module, steering wheel and lower instrument panel. Disconnect the steering column shrouds and multifunction switches. Install the new air bag sliding contact making sure it is aligned correctly and reconnect everything.