2001 Mercury Sable Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2001 Mercury Sable

• Q: How to Arm and Disarm an Airbag System on 2001 Mercury Sable?

  A: In order to deploy and de-deploy the air bag system, the ignition must be placed RUN and the air bag indicator activated and lit within six seconds. In case of failure to light, remains lit or flashing, then there might be an SRS fault. When the air bag indicator shows that there are five sets of beeps, the air bag sensor requires repair.
• Q: What is the Importance of the Air Bag Control Module in the Supplemental Restraint System (SRS) and What Steps Should Be Taken if It Is Damaged on 2001 Mercury Sable?

  A: The air bag system cannot do without the Restraints Control Module (RCM). Check after the accident, repair the RCM; replace it when necessary. Always put on safety glasses and stay away of memory savers. Check that the SRS is defect free prior to handing back the vehicle. Subscribe to correct RCM removal and installation procedures.
• Q: What Precautions Should Be Taken When Servicing the Clock Spring Assembly on 2001 Mercury Sable?

  A: Wear safety glasses and employ care when handling air bag modules when servicing the Clock Spring assembly. Make sure that the SRS is running and then handover the vehicle. Have the right procedures during removal and installation, such as centering Clock Spring and fixing of all parts. And lastly, repower and install the steering wheel.