2004 Lincoln Town Car Coil Springs, Control Arm, Shock Absorber, Steering Knuckle

Control Arm, Shock Absorber, Steering Knuckle Installation and Repair Tips for 2004 Lincoln Town Car

• Q: What precautions should be taken before servicing the lower control arm on 2004 Lincoln Town Car?

  A: The air suspension system has to be turned off before servicing the lower control arm to avoid unpredicted inflating or deflation. Take out the wheel and tire set, the nuts and bolts, but do not tear up the steering bellows boot. Install the new lower arm, and tighten the pivot nuts and bolts, and position the front end as necessary.
• Q: How should the shock absorber and spring assembly be handled to ensure safety and proper assembly on 2004 Lincoln Town Car?

  A: The spring assembly and the shock absorber are pressurized with gas, which may be dangerous to the human body. During disassembling, a spring compressor should be used, and the parts replaced should be similar to those. Label parts according to reference, examine them against damage and observe punctual procedures during assembly.
• Q: What Steps Should Be Taken Before Removing and Installing the Steering Knuckle on 2004 Lincoln Town Car?

  A: Turn off the air suspension system to avoid sudden inflation or deflation before dismounting and reinstalling the wheel knuckle. Take off the wheel bearing and hub, loosen the tie-rod and relieve the stabilizer bar connections. Lastly, take out the nut and wheel knuckle, and then, install it again.