2005 Ford Excursion Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2005 Ford Excursion

• Q: How to Inspect and Repair the Airbag System After a Collision to Ensure Safety on 2005 Ford Excursion?

  A: Repair and inspect Supplemental Restraint System (SRS) after an accident. Pull instruments out prior to road test. Change deployed devices and clean DTCs. Check and fix the occupant classification sensor and fixing locations. Change the parts, when needed, and perform a complete inspection of the damaged parts of a vehicle.
• Q: Is the Orientation of the Air Bag Control Module Critical for Proper Supplemental Restraint System (SRS) Operation on 2005 Ford Excursion?

  A: The restraints control module (RCM) is an essential component of the air bag system with its orientation. Inspect and replace broken RCMs and sensors after a collision. Never forget to put safety glasses on and do not use memory savers. Install and set up the RCM properly and make sure the air bag indicator is working properly to verify that the system is operating.
• Q: How to Service and Repair the Clock Spring Assembly on 2005 Ford Excursion?

  A: In order to replace the Clock Spring assembly, put on safety glasses and disarm the system. Disassemble the driver air bag module, steering wheel and lower panel. Disassemble electrical connector and eliminate Clock Spring. To install, position the rotor centrally, orient it with the steering column, and reassemble parts and then re-energize the system.