2005 Ford Thunderbird Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2005 Ford Thunderbird

• Q: What precautions should be taken when servicing a side Airbag module on 2005 Ford Thunderbird?

  A: Wear safety glasses when servicing a side air bag module; face the bag and tear seam away from your body. Wash hands after deployment. Depower SRS before service. Remove the seat, release trim noting harness routing, detach connectors, remove/inspect/replace the module and components, secure trim, reinstall seat, repower and test.
• Q: What precautions should be taken when servicing the air bag control module and ensuring the proper operation of the restraints control module (RCM) on 2005 Ford Thunderbird?

  A: Wear safety glasses when servicing the air bag control module to avoid getting an injury. Maintain the restraints control module (RCM) in the proper position and look after collisions. There is no need to probe connectors, you should use the correct amount of torque, and make sure that RCM is installed correctly. Take the correct steps in removing and installing.
• Q: What Safety Precautions Should Be Taken When Servicing the Clock Spring Assembly on 2005 Ford Thunderbird?

  A: Wear safety glasses and observe care when handling air bag modules when servicing the Clock Spring assembly. Hand washing after deployment, and not to probe connectors. Replace damaged modules. Be sure the SRS is functional prior to returning the vehicle. Install the Clock Spring correctly and put pieces together in a secure way. Then re-power the system.