2005 Lincoln Town Car Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2005 Lincoln Town Car

• Q: What Precautions Should Be Taken When Servicing the Clock Spring Assembly on 2005 Lincoln Town Car?

  A: Wear safety glasses and treat live air bag modules when servicing Clock Spring assembly. Do not place modules face down and wash hands on deploying. Do not probe connectors, and change failed modules. Test the SRS before the release of the vehicle. Replacement and installation of components should be done in proper procedures.
• Q: What precautions should be taken when servicing the air bag control module and ensuring the proper operation of the supplemental restraint system on 2005 Lincoln Town Car?

  A: Wear safety glasses when servicing the air bag control module. RCM orientation and mounting must be intact; replace if collision-damaged. Avoid memory savers. Depower system, remove ashtray, carpet patch and insulator, remove RCM and disconnect connectors, then reinstall, secure connectors, configure new RCM and clear continuous DTCs.
• Q: What precautions should be taken when servicing a side Airbag module on 2005 Lincoln Town Car?

  A: Wear safety glasses and hold an air bag with the air bag out of the case when removing a side air bag module. Wash hands after exposure to sodium hydroxide. Never probe connectors. Always replace damaged covers, depower the SRS prior to service, and make sure that the new modules are well installed, inspecting them and other foreign objects.