2006 Mercury Mountaineer Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2006 Mercury Mountaineer

• Q: How is the Clock Spring Serviced and Repaired in an Air Bag Supplemental Restraint System (SRS) on 2006 Mercury Mountaineer?

  A: Wear safety glasses when changing the Clock Spring assembly in a SRS vehicle, never use memory savers. Make sure the SRS is faultless and then hand back the vehicle. Take correct precautions in removing and installing, ensure that the Clock Spring is centered to avoid failure, and restore power to the system upon re-assembling.
• Q: What precautions should be taken when servicing the side Airbag module on 2006 Mercury Mountaineer?

  A: Wear safety glasses when servicing the side air bag module in order to reduce the risk of injury. Carefully touch the module and not to break. In case a side air bag has been deployed then replace the parts and check the SRS is functioning properly and then hand back the vehicle. Take removal and installation in proper processes and look at damages.
• Q: What Precautions Should Be Taken When Servicing the Air Bag Control Module on 2006 Mercury Mountaineer?

  A: Wear safety glasses when working on the Restraints Control Module (RCM) to avoid injury by air bag deployment. Do not change ignition ON position of RCM. Replacing RCM following collisions, checking of components and proper torque. Switch off power and remove before installation and use correct installation procedures.