FordParts
My Garage
My Account
Cart
Engine & Trans Mounting
2009 Ford Explorer Sport Trac Engine Mount, Engine Mount Bracket, Engine Mount Torque Strut, Motor And Transmission Mount
Currently shopping for
2009 Ford Explorer Sport Trac
Change VehicleCategories Close X
Currently selected
Engine
Other Categories
A/C & Heating
Air & Fuel Delivery
Belts & Cooling
Body & Hardware
Brakes
Charging & Starting
Driveline & Axles
Electrical
Emission Control & Exhaust
Headlights & Lighting
Interior & Exterior Trim
Maintenance & Lubrication
Steering
Suspension
Transmission
Categories Close X
How to use OE catalog
2 diagrams found for the vehicle you selected.Select your vehicle options to narrow down results.
- 1.Engine - Engine & Trans Mounting (6 Cyl 4.0 L)
- 2.Engine - Engine & Trans Mounting (8 Cyl 4.6 L)
Sort by:
Ref No.
Ref No.
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
Part Description
- 1
MSRP: $102.33 Your Price: $70.301
- 2
7A2Z-6038-CA
Insulator Assembly - Engine SupportMotor Mount- Part Notes: 4.0L;4.6L
- Location: Driver Side
MSRP: $91.67 Your Price: $62.98
- 3
- 3
- 4
MSRP: $23.54 Your Price: $17.301 - 4
MSRP: $39.34 Your Price: $28.441
- 5
MSRP: $47.33 Your Price: $33.37 - 5
- 5
MSRP: $114.51 Your Price: $82.771
- 6
-W708138-S900
Nut - Adjusting ScrewTransmission Mount Bolt- Part Notes: 4.0L
- Location: Driver Side;Passenger Side
MSRP: $18.75 Your Price: $13.781
-W710658-S439
Bolt- Part Notes: M10 X 65MM
- Production Date: 01/2006-10/2010
- Fitting Vehicle Options: 8 Cyl 4.6L, Two-Wheel Drive
- Require Quantity: 4
- Package Quantity: 4
- Callout Name: HB1
MSRP: $18.50 Your Price: $10.87
7A2Z-6038-B
Insulator Assy- Part Notes: Insulator
- Location: Passenger Side
- Production Date: 01/2006-10/2010
- Fitting Vehicle Options: 6 Cyl 4.0L SOHC EFI
- Callout Name: 6038A
- Replaced By: 7A2Z-6038-D
MSRP: $102.33 Your Price: $70.30
- -W706391-S439
Bolt And Washer Assy - Hex.Head- Part Notes: M6 x 18MM
- Production Date: 01/2006-10/2010
- Callout Name: HB2
MSRP: $1.77 Your Price: $1.28
-W709198-S437
Bolt- Part Notes: M6 X 20MM
- Production Date: From 01/2006
- Fitting Vehicle Options: 6 Cyl 4.0L SOHC EFI
- Callout Name: HB2
MSRP: $20.00 Your Price: $11.75
5R3Z-12270-AA
Clamp- Production Date: 01/2006-10/2010
- Fitting Vehicle Options: 6 Cyl 4.0L SOHC EFI
- Callout Name: 12270
MSRP: $21.00 Your Price: $13.22
-W709211-S437
Stud- Part Notes: M6 X 19 + M6 X 19
- Production Date: 01/2006-10/2010
- Fitting Vehicle Options: 6 Cyl 4.0L SOHC EFI
- Require Quantity: 2
- Package Quantity: 2
- Callout Name: HT1
MSRP: $8.00 Your Price: $4.70
OEM 2009 Ford Explorer Sport Trac Parts for Engine & Trans Mounting
Genuine OEM 2009 Ford Explorer Sport Trac parts are made using the original design, the high standards, in the Ford official factories, and all of these ensure that they always fit perfectly and easily. FordPartsDeal.com is a trusted source for finding these authentic OEM Engine & Trans Mounting parts at very competitive prices. Our professional team is here to help you choose the right 2009 Ford Explorer Sport Trac Engine Mount, Engine Mount Bracket, Engine Mount Torque Strut, Motor And Transmission Mount, and our fast delivery options ensure that your parts are always delivered quickly.
Engine Mount, Motor And Transmission Mount Installation and Repair Tips for 2009 Ford Explorer Sport Trac
- Q: How to remove and replace the engine mount on 2009 Ford Explorer Sport Trac?A: In order to change the mounts of the engine, it is necessary to lift the vehicle up in neutral, unplug the battery and take off such elements as power steering reservoir and coolant tank, secure the bolts to the required level when attaching again. Disassemble the engine mounts and axle housing and re-attach everything in the reverse order and with the correct torque.
- Q: How to Service the Rear Motor And Transmission Mount for the 5R55S in a Rear-Wheel Drive on 2009 Ford Explorer Sport Trac?A: In a rear-wheel drive vehicle that has a 5R55S transmission, in order to service the transmission mount, hoist the vehicle and hold the transmission and remove the insulator. Fit the new insulator, clamping it in place to the extension housing and crossmember using screws and nuts to 90 Nm (66 lb-ft) tight.