My Garage
Cart
Water Pump

2009 Ford Focus Water Pump, Coolant Temperature Sensor, Cooling Hose

Currently shopping for
2009 Ford Focus
Change Vehicle
Vehicle Options
4 Cyl 2.0 L GAS
Vehicle Options
4 Cyl 2.0 L GAS
Categories Close X

Currently selected

Other Categories

A/C & Heating
Air & Fuel Delivery
Body & Hardware
Brakes
Charging & Starting
Driveline & Axles
Electrical
Emission Control & Exhaust
Engine
Headlights & Lighting
Interior & Exterior Trim
Maintenance & Lubrication
Steering
Suspension
Transmission
Categories Close X
2 diagrams found for the vehicle you selected.Select your vehicle options to narrow down results.
  • 1.Cooling - Water Pump
    2009 Ford Focus Water Pump Diagram 1 - Thumbnail
  • 2.Cooling System - Water Pump
    2009 Ford Focus Water Pump Diagram 2 - Thumbnail
Sort by:
Ref No.
Ref No.
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
  • -W500224-S309
    Screw
    • Part Notes: M8 X 25MM
    • Fit Note: 4 Cyl 2.0L Duratec HE
    • Production Date: 09/2003-12/2010
    • Callout Name: HS1
    • Replaced By: -W500224-S437
    MSRP: $4.00 Your Price: $2.35
  • Ford -W706284-S309 Bolt
    -W706284-S309
    Bolt
    • Part Notes: M8 X 90MM
    • Fit Note: 4 Cyl 2.0L Duratec HE
    • Production Date: 09/2003-12/2010
    • Callout Name: HB1
    • Replaced By: -W706284-S437
    MSRP: $15.00 Your Price: $8.81

OEM 2009 Ford Focus Parts for Water Pump

Genuine OEM 2009 Ford Focus parts are made using the original design, the high standards, in the Ford official factories, and all of these ensure that they always fit perfectly and easily. FordPartsDeal.com is a trusted source for finding these authentic OEM Water Pump parts at very competitive prices. Our professional team is here to help you choose the right 2009 Ford Focus Water Pump, Coolant Temperature Sensor, Cooling Hose, and our fast delivery options ensure that your parts are always delivered quickly.

Water Pump Installation and Repair Tips for 2009 Ford Focus

  • Q: How to service the Water Pump on 2009 Ford Focus?
    A: Position vehicle on a hoist. Remove two bolts securing expansion tank and set aside. Loosen three pump pulley bolts, remove drive belt and drain system. Remove three pulley bolts and pulley, seat pump, install and tighten three pump bolts, fit new O-ring lubricated with coolant, reassemble, then fill and bleed.
See All Installation and Repair Tips