What Precautions Should Be Taken When Servicing the Clock Spring on 2000 Ford Contour?

Wear safety glasses; point air bag/trim away. Disconnect steering battery, center and lock. Take off shrouds and wheel, unplug connectors, air-bag too. Free three retainers using a screwdriver, take off sliding contact. Installation by centering (CCW stop, followed by approximately 2.75 CW to position marks). Reassemble. Reconnecting battery, relearn required (drive) of about 16 km.

OEM 2000 Ford Contour Clock Spring

Spiral Cable Clock Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clock Spring found

View related parts
2000 Ford Contour Clockspring Part Number: F8RZ-14A664-DA
Product Specifications
- Other Name: Cover And Contact Plate; Air Bag Clockspring; Cover And Contact Plate Assembly
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-14A664-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford Contour Submodels:
- Base, GL, LX, SE, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2000 Ford Contour Clock Spring

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Contour Clock Spring available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Contour Clock Spring as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Contour Clock Spring Parts Q&A

Q: What Precautions Should Be Taken When Servicing the Clock Spring on 2000 Ford Contour?
A: Wear safety glasses; point air bag/trim away. Disconnect steering battery, center and lock. Take off shrouds and wheel, unplug connectors, air-bag too. Free three retainers using a screwdriver, take off sliding contact. Installation by centering (CCW stop, followed by approximately 2.75 CW to position marks). Reassemble. Reconnecting battery, relearn required (drive) of about 16 km.