FordParts
My Garage
My Account
Cart
OEM 2000 Ford Contour Oxygen Sensors
Oxygen O2 Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Oxygen Sensors found
2000 Ford Contour Oxygen Sensor, Rear Driver Side Part Number: GU2Z-9G444-A
$56.02 MSRP: $92.18You Save: $36.16 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor
- Position: Rear Driver Side
- Replaces: 1R3Z-9G444-BA, 1R3Z-9G444-AA, 5F9Z-9G444-BA, 5W6Z-9G444-BA, 5C5Z-9F472-AA, DY-1091, DY-1005, DY-1063, DY-1089, DY-649, DY-1086, DY-1104, F1TZ-9F472-A, F4DZ-9F472-A, F6DZ-9G444-AA, F88Z-9F472-AA, F78Z-9F472-BA, F75Z-9G444-BA, DY-1081, DY-1060, DY-800, DY-831, DY-832, F3UZ-9F472-A, F4DZ-9F472-B, F4ZZ-9F472-C, F4UZ-9F472-A, F78Z-9F472-AA, F7RZ-9G444-BA, DY-1040, XC2Z-9F472-BA, F1SZ-9F472-A, XR3Z-9G444-BB, F5WZ-9F472-BA, 5C5Z-9F472-BA, 6E5Z-9G444-AA, 5W6Z-9G444-AA, DY-1034, DY-1093, DY-1058, F1SZ-9F472-B, 6L7Z-9F472-BA, DY-761, F5AZ-9G444-B, F4SZ-9F472-A, F77Z-9F472-BA, F6DZ-9G444-B, DY-1039, F85Z-9G444-E, F5UZ-9F472-A, F75Z-9G444-AA, F88Z-9F472-AB, F4SZ-9F472-D, F8RZ-9G444-BB, F85Z-9G444-AA, F85Z-9G444-AB, F88Z-9F472-BA, DY-1053, XR3Z-9G444-JA, XC2Z-9F472-AA, DY-1038, DY-703, F6DZ-9G444-EA, F5MZ-9F472-AA, DY-1087, FOTZ-9F472-A, DY-1057, XR3Z-9G444-EA, XR3Z-9G444-HA, DY-661, DY-731
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.2 x 7.7 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GU2Z-9G444-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Contour Oxygen Sensor Part Number: F5RZ-9F472-B
$52.08 MSRP: $72.05You Save: $19.97 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor Assembly
- Replaces: F5RZ-9F472-AA
- Base No.: 9F472
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.6 x 7.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5RZ-9F472-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Contour Oxygen Sensor Part Number: XC2Z-9F472-BB
$80.58 MSRP: $135.27You Save: $54.69 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Hego
- Base No.: 9F472
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.3 x 7.9 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC2Z-9F472-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Contour Oxygen Sensors
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Contour Oxygen Sensors available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Contour Oxygen Sensors as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Contour Oxygen Sensors Parts Q&A
- Q: How to Service the Heated Oxygen Sensors on 2000 Ford Contour?A: The service of a heated oxygen sensor should begin with the removal of the engine splash shield. It starts by disconnecting the heated oxygen sensor electrical connector then removing the wiring harness from its retaining clip. The service begins by removing first the air conditioning hose retaining nut followed by the step to remove the power assisted steering hose retaining nut. Before removing the heated oxygen sensor you need to disconnect both the coolant hose retaining studs along with the dipstick tube and lifting eye retaining bolts. The exhaust manifold heat shield requires removal before you can extract both the heated oxygen sensor. To install the part you should perform the steps in opposite order of removal.