FordParts
My Garage
My Account
Cart
OEM 2000 Ford Contour Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Intake Manifolds found
2000 Ford Contour Intake Manifold Part Number: 1S8Z-9424-AA
Product Specifications- Other Name: Manifold Assembly - Inlet
- Manufacturer Note: 2.5L H.O., FROM 5/17/99
- Base No.: 9424
- Item Weight: 19.50 Pounds
- Item Dimensions: 9.3 x 21.0 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S8Z-9424-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Contour Intake Manifold Part Number: XS2Z-9424-CB
Product Specifications- Other Name: Manifold Assembly - Inlet
- Manufacturer Note: Attaches to head w/ 7 bolts. , AFTER 5/25/99
- Base No.: 9424
- Item Weight: 8.70 Pounds
- Item Dimensions: 18.0 x 15.8 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XS2Z-9424-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Contour Intake Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Contour Intake Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Contour Intake Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Contour Intake Manifold Parts Q&A
- Q: How to service and repair the intake manifold on 2000 Ford Contour?A: You can service and repair the intake manifold by first taking off the Air Cleaner (ACL) outlet pipe and unplugging the assembly that includes the Throttle Position (TP) sensor and Idle Air Control (IAC) and engine control sensor wiring from the electrical connectors. Start the procedure by taking off the fuel supply manifold before detaching the engine wiring harness which will be set aside. Unplug the intake manifold vacuum supply lines after turning the hoses and squeezing the tabs and then removing them from the manifold. To disconnect the brake booster vacuum line the user must first remove its quick-release coupling then pull out the line. Given access you should first remove the fuel charging wiring harness and accessory drive belt and generator bolts before moving the generator to a sideward position. You must remove the intake manifold after you detach seven bolts and two nuts and dispose of the intake manifold gasket. Place a new intake manifold gasket before installing the part in the reverse order of disassembly.