OEM 2000 Ford Crown Victoria Air Suspension Compressor

2000 Ford Crown Victoria Air Suspension Compressor Parts Questions & Experts Answers

• Q: How to Service and Repair the Air Suspension Compressor on 2000 Ford Crown Victoria?

  A: Starting service or repair of the air compressor and pump requires users to disable the air suspension switch found on the LH side of the luggage compartment so vehicle damage and personal injury can be avoided. You must disconnect the battery ground wire but afterward remove the Engine Air Cleaner (ACL) as well as the air compressor and drier cover using pushpin removal. Continue by taking off the snorkel pushpin followed by the removal of the snorkel. To remove the air compressor with drier compressor the quick connect locking ring needs compression to release the air line while simultaneously disconnecting the electrical connector until completing removal with three bolts. Install the fitting by making sure the white air line enters completely inside. The vehicle requires driving at least 16 km (10 mi) to adapt its learning process after disconnecting then reconnecting the battery due to potential abnormal driving behavior. The air suspension system needs inflation following air compressor installation to finish the process.