FordParts
My Garage
My Account
Cart
OEM 2000 Ford Crown Victoria Control Arm
Suspension Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Control Arms found
2000 Ford Crown Victoria Control Arm, Front Passenger Side Part Number: F7AZ-3084-BA
$155.54 MSRP: $211.66You Save: $56.12 (27%)Product Specifications- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Upper Control Arm
- Position: Front Passenger Side
- Replaces: F6AZ-3084-BA
- Base No.: 3084
- Item Weight: 10.60 Pounds
- Item Dimensions: 5.3 x 15.8 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7AZ-3084-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Upper Control Arm
- Position: Front Passenger Side
- Replaces: F6AZ-3084-AA
- Base No.: 3084
- Item Weight: 9.80 Pounds
- Item Dimensions: 15.8 x 11.4 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7AZ-3084-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Front Suspension; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Lower Control Arm
- Position: Front Passenger Side
- Base No.: 3078
- Item Weight: 20.90 Pounds
- Item Dimensions: 17.6 x 7.7 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW1Z-3078-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Upper Control Arm
- Position: Front Driver Side
- Replaces: F6AZ-3085-AA
- Base No.: 3085
- Item Weight: 10.30 Pounds
- Item Dimensions: 3.8 x 14.8 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7AZ-3085-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Upper Control Arm
- Position: Front Driver Side
- Replaces: F5AZ-3085-B
- Base No.: 3085
- Item Weight: 10.40 Pounds
- Item Dimensions: 18.3 x 5.2 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6AZ-3085-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Lower Control Arm
- Position: Front Driver Side
- Replaces: XW1Z-3079-DA
- Base No.: 3079
- Item Weight: 20.50 Pounds
- Item Dimensions: 17.6 x 7.5 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW1Z-3079-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Crown Victoria Control Arm
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Crown Victoria Control Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Crown Victoria Control Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Crown Victoria Control Arm Parts Q&A
- Q: How to service and repair the upper control arm on 2000 Ford Crown Victoria?A: Start the upper control arm repair procedure by lifting the vehicle, supporting it from underneath and then disassemble the wheel and tire assembly. Prop a suitable jack stand beneath the front suspension lower arm while lowering the vehicle until the lower arm starts to move. A safety wire should be used to attach the front wheel spindle to the frame before removing the bolt and nut that will detach the front suspension upper arm through the two nuts and bolts removal. Apply the front suspension upper arm nuts and bolts only after reaching curb height suspension position with the vehicle then perform the reverse installation steps. Conduct a wheel alignment check that might require adjustment if needed. Controlled service expenses will result from using inferior quality fasteners or substitute designs instead of similar or same part number replacements for suspension applications. The proper function of essential parts depends on following specified torque values during the reassembly process.