OEM 2000 Ford Escort Tie Rod End

2000 Ford Escort Tie Rod End Parts Questions & Experts Answers

• Q: How to service and repair the outer tie rod end on 2000 Ford Escort?

  A: The service process for repairing the outer tie rod end starts through key operation to the RUN position followed by vehicle elevation for support. Start your procedure by unfastening lug nuts to remove the wheel together with tire. Detach the tie rod end castellated nut by removing its cotter pin and then removing the nut. Attach the Tie Rod End Separator device between the front wheel knuckle and tie rod end. Perform marking on the tie rod end together with the tie rod end jam nut and the front wheel spindle tie rod. The next step involves easing the tie rod end jam nut and taking out the tie rod end. The new tie rod end must be threaded onto the front wheel spindle tie rod until it reaches the installation marks and the tie rod end jam nut should be tightened. Connect the tie rod end to the front wheel knuckle while tightening the castellated nut until the holes match with the pin position before installing both components. Next install the wheel together with its tire then lower the vehicle before aligning the front wheels to specification as described.