OEM 2000 Ford Excursion Sun Visor

2000 Ford Excursion Sun Visor Parts Questions & Experts Answers

• Q: How to remove and replace the sun visor on 2000 Ford Excursion?

  A: New sun visor gaskets need installation after successfully removing the sun visor. Screws (36041A32) need to be discarded while using sufficient pressure to release sun visor (3604118) from the vehicle before disconnecting its electrical connection. The technician should remove and dispose of the sun visor gasket part number 36500A16. The removal of a rear rivet nut requires that the headliner gets completely removed from the vehicle. Check with the corresponding specifications if the hole exceeds acceptable specifications. The procedure to install new sun visor retaining screws or rivet nuts involves first grinding or drilling both parts flat followed by punching the remaining rivet nut through the hole before installation of a new rivet nut. Factory workers must clean both mating components of sun visor and roof panel before build-up and should apply anti-rattle tape to the electrical connector. To reinstall the sun visor follow the reverse steps of removal.