How to service the sun visor on Ford Excursion?

Begin the sun visor service by eliminating and discarding the screws while you need to replace the sun visor gaskets since you detached the visor. Separate the sun visor from the vehicle by using sufficient force before removing its electrical connector. The service requires you to get rid of the existing sun visor gasket. You must remove the headliner when dealing with rear rivet nuts. Examine the specifications when the hole shows improper measurement. A two-step installation method for new sun visor retaining screws or rivet nut requires drill or grinding both components for flush alignment before punching the rivet nut through the hole to insert a new one. When installing the assembly clean both sun visor mating surfaces and roof panel while wrapping the electrical connector with anti-rattle tape before following the removal steps in reverse order with a new sun visor gasket.

How to remove and replace the sun visor on Ford Excursion?

The installation process starts with placing new gaskets on the sun visor before removing it. A professional force tool should be used to detach the sun visor (3604118) from the vehicle by disconnecting its electrical connector after discarding the screws (36041A32). The sun visor gasket (365OOAl6) needs to be discarded following removal from the gasket slot. The procedure requires removal or replacement of the headliner whenever the technician works with a rear rivet nut. Verify that any holes which do not comply with specifications meet the standard requirements. The procedure for installing new sun visor retaining screws or rivet nuts requires you to first grind or drill both components flat before punching the remaining rivet nut through the hole for new assembly. Both mating surfaces require cleaning before installing the sun visor and roof panel while using anti-rattle tape to secure the electrical connector. Reinstall the sun visor according to the reverse order of removal steps.

OEM Ford Excursion Sun Visor

Sun Shade Visor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Sun Visors found

View related parts
Ford Excursion Sunvisor, Driver Side Part Number: 2C3Z-2504105-CAE
Product Specifications
- Other Name: Visor Assembly - Sun; Sun Visor, Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Sunvisor, Passenger Side Part Number: 2C3Z-2504104-CAE
Product Specifications
- Other Name: Visor Assembly - Sun; Sun Visor, Right
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Sunvisor, Passenger Side Part Number: YC3Z-7804104-AAD
Product Specifications
- Other Name: Sun Visor Assembly; Sun Visor, Right
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2001 Ford Excursion | Limited, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Sunvisor, Driver Side Part Number: 5C7Z-7804105-CAA
Product Specifications
- Other Name: Visor Assembly - Sun; Sun Visor, Left
- Manufacturer Note: LH (,H*),Medium Light Pebble , with homelink
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Sunvisor, Passenger Side Part Number: 5C3Z-2504104-CAB
Product Specifications
- Other Name: Visor Assembly - Sun; Sun Visor, Right
- Manufacturer Note: RH (-E*)-Medium Light Pebble
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Sunvisor, Driver Side Part Number: 3C7Z-7804105-CAD
Product Specifications
- Other Name: Visor Assembly - Sun; Sun Visor, Left
- Manufacturer Note: LH (-E*)-Medium Flint - with homelink
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Sunvisor, Driver Side Part Number: 3C7Z-7804105-CAC
Product Specifications
- Other Name: Visor Assembly - Sun; Sun Visor, Left
- Manufacturer Note: LH (-H*)-Medium Parchment - with homelink
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Sunvisor, Driver Side Part Number: 3C7Z-7804105-CAB
Product Specifications
- Other Name: Visor Assembly - Sun
- Manufacturer Note: LH (-E*)-Medium Flint - with homelink, FROM 12/03/2003
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Sunvisor, Driver Side Part Number: 2C3Z-2504105-CAF
Product Specifications
- Other Name: Visor Assembly - Sun; Sun Visor, Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Sunvisor, Passenger Side Part Number: 2C3Z-2504104-CAF
Product Specifications
- Other Name: Visor Assembly - Sun; Sun Visor, Right
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

Ford Excursion Sun Visor

OEM Sun Visor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Sun Visor with long life and a perfect fit. Come to our website and find genuine Ford Excursion parts. We keep a wide inventory of OEM Excursion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Excursion Sun Visor stands as a vital product which demonstrates performance reliability while ensuring safety and efficiency during usage for all users. Safety during driving requires the Ford Excursion Sun Visor since it effectively eliminates harmful bright light and increases visibility by blocking sunlight. These sun visors delivered within various Ford Excursion model versions present two installation types: fixed mount and swivel mount which provides personalized visibility adjustments for each person. The Sun Visor of the Ford Excursion enhances both functionality and thetics of the vehicle which harmonizes with the interior design. The choice of replacements for the Ford Excursion interior depends mainly on material selection alongside color matching and proper fitment requirements. The investment in quality Ford Excursion Sun Visors delivers value because their contribution to comfort and safety outweighs the cost range between $50 to $250. BlockerBeam technology found in the car demonstrates the superiority of its crash compatibility design which makes a trustable sun visor essential for operating safely on the road. The car Sun Visor succeeds in the automotive market through both functional convenience and its effortless incorporation with performance and safety features thereby becoming a necessary part for all the automaker model vehicle owners.

Ford Excursion Sun Visor Parts and Q&A

Sunvisor, Driver Side
3C7Z-7804105-CAC
Q: How to service the sun visor on Ford Excursion?
A:
Begin the sun visor service by eliminating and discarding the screws while you need to replace the sun visor gaskets since you detached the visor. Separate the sun visor from the vehicle by using sufficient force before removing its electrical connector. The service requires you to get rid of the existing sun visor gasket. You must remove the headliner when dealing with rear rivet nuts. Examine the specifications when the hole shows improper measurement. A two-step installation method for new sun visor retaining screws or rivet nut requires drill or grinding both components for flush alignment before punching the rivet nut through the hole to insert a new one. When installing the assembly clean both sun visor mating surfaces and roof panel while wrapping the electrical connector with anti-rattle tape before following the removal steps in reverse order with a new sun visor gasket.
Sunvisor, Passenger Side
YC3Z-7804104-AAD
Q: How to remove and replace the sun visor on Ford Excursion?
A:
The installation process starts with placing new gaskets on the sun visor before removing it. A professional force tool should be used to detach the sun visor (3604118) from the vehicle by disconnecting its electrical connector after discarding the screws (36041A32). The sun visor gasket (365OOAl6) needs to be discarded following removal from the gasket slot. The procedure requires removal or replacement of the headliner whenever the technician works with a rear rivet nut. Verify that any holes which do not comply with specifications meet the standard requirements. The procedure for installing new sun visor retaining screws or rivet nuts requires you to first grind or drill both components flat before punching the remaining rivet nut through the hole for new assembly. Both mating surfaces require cleaning before installing the sun visor and roof panel while using anti-rattle tape to secure the electrical connector. Reinstall the sun visor according to the reverse order of removal steps.