How to service the front fender on 2000 Ford Expedition?

You need to start Expedition service of the front fender by removing the radiator grille opening panel reinforcement (8A284). First detach the front wheel opening moulding by removing its pin-type retainer along with screws then detach the moulding if it exists. The first step is to remove the front fender splash shield (16103) through the process of screw removal followed by pin-type retainer extraction. Start by removing the cowl grille from the vehicle followed by the inner fender stuffing material. The stone guard removal starts with removing its pin-type retainers. You should detach the front fender after removing its bolts. In order to install the new fender simply do the reverse steps which were used for removal.

OEM 2000 Ford Expedition Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fenders found

View related parts
2000 Ford Expedition Fender, Front Driver Side Part Number: 2L3Z-16006-AA
$185.02 MSRP: $269.32
You Save: $84.30 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Left
- Manufacturer Note: L.H., w/wheel lip mouldings
- Position: Front Driver Side
- Replaces: F85Z-16006-CA
- Base No.: 16006
- Item Weight: 11.00 Pounds
- Item Dimensions: 49.4 x 37.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L3Z-16006-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Fender, Front Driver Side Part Number: 2L3Z-16006-BA
$175.48 MSRP: $255.43
You Save: $79.95 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Left
- Manufacturer Note: L.H., w/o wheel lip mouldings
- Position: Front Driver Side
- Replaces: F85Z-16006-BA
- Base No.: 16006
- Item Weight: 22.20 Pounds
- Item Dimensions: 53.5 x 39.9 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L3Z-16006-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Fender, Front Passenger Side Part Number: 2L3Z-16005-BA
$189.29 MSRP: $292.12
You Save: $102.83 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Manufacturer Note: R.H., w/o wheel lip mouldings
- Position: Front Passenger Side
- Replaces: F85Z-16005-BA
- Base No.: 16005
- Item Weight: 22.30 Pounds
- Item Dimensions: 9.1 x 54.3 x 41.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L3Z-16005-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Fender, Front Passenger Side Part Number: 2L3Z-16005-AA
$179.11 MSRP: $260.72
You Save: $81.61 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Manufacturer Note: R.H., w/wheel lip mouldings
- Position: Front Passenger Side
- Replaces: F85Z-16005-CA
- Base No.: 16005
- Item Weight: 21.30 Pounds
- Item Dimensions: 9.2 x 53.8 x 39.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L3Z-16005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Fender, Front Passenger Side Part Number: YL1Z-16005-BA
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Manufacturer Note: R.H., , w/o wheel lip molding, without antenna hole
- Position: Front Passenger Side
- Base No.: 16005
- Item Weight: 19.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL1Z-16005-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Fender, Front Passenger Side Part Number: YL1Z-16005-AA
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Manufacturer Note: R.H., w/wheel lip molding, without antenna hole
- Position: Front Passenger Side
- Base No.: 16005
- Item Weight: 20.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL1Z-16005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2000 Ford Expedition Fender

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Expedition Fender available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Expedition Fender as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Expedition Fender Parts Q&A

Q: How to service the front fender on 2000 Ford Expedition?
A: You need to start Expedition service of the front fender by removing the radiator grille opening panel reinforcement (8A284). First detach the front wheel opening moulding by removing its pin-type retainer along with screws then detach the moulding if it exists. The first step is to remove the front fender splash shield (16103) through the process of screw removal followed by pin-type retainer extraction. Start by removing the cowl grille from the vehicle followed by the inner fender stuffing material. The stone guard removal starts with removing its pin-type retainers. You should detach the front fender after removing its bolts. In order to install the new fender simply do the reverse steps which were used for removal.