What Preparations Are Necessary Before Removing the Rear Drive Shaft on a 4X2 on 2000 Ford Explorer?

Prior to disconnection of the rear driveshaft of a 4X2 vehicle, switch off air suspension. Safely lift the car in the neutral position, index-mark the driveshaft and loosen the four bolts. Installation Revert the removal procedure in reverse and install lower the driveshaft, plug the extension housing, and use new bolts.

OEM 2000 Ford Explorer Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Drive Shafts found

View related parts
2000 Ford Explorer Drive Shaft Part Number: XL2Z-4A376-AA
$414.28 MSRP: $561.54
You Save: $147.26 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: F77Z-4A376-BA
- Base No.: 4A376
- Item Weight: 14.10 Pounds
- Item Dimensions: 5.0 x 5.0 x 34.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z-4A376-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Explorer Submodels:
- Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
2000 Ford Explorer Drive Shaft Part Number: F77Z-4602-DA
$757.13 MSRP: $1035.38
You Save: $278.25 (27%)
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: F57Z-4602-F, F1TZ-4602-AJ
- Base No.: 4602
- Item Weight: 20.80 Pounds
- Item Dimensions: 48.4 x 9.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F77Z-4602-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
2000 Ford Explorer Drive Shaft Part Number: F77Z-4602-CB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Weight: 23.50 Pounds
- Item Dimensions: 26.3 x 4.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F77Z-4602-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Explorer Submodels:
- Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
2000 Ford Explorer Drive Shaft Part Number: 5L5Z-4602-BB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: F87Z-4602-AA
- Base No.: 4602
- Item Dimensions: 26.5 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-4602-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
2000 Ford Explorer Drive Shaft Part Number: XL2Z-4A376-BB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4A376
- Item Weight: 44.00 Pounds
- Item Dimensions: 59.3 x 11.7 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z-4A376-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.0 L GAS

2000 Ford Explorer Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Explorer Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Explorer Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Explorer Drive Shaft Parts Q&A

Q: What Preparations Are Necessary Before Removing the Rear Drive Shaft on a 4X2 on 2000 Ford Explorer?
A: Prior to disconnection of the rear driveshaft of a 4X2 vehicle, switch off air suspension. Safely lift the car in the neutral position, index-mark the driveshaft and loosen the four bolts. Installation Revert the removal procedure in reverse and install lower the driveshaft, plug the extension housing, and use new bolts.