How to service the wiper motor on 2000 Ford F-150?

Service of the wiper motor requires starting with the pivot arm by putting off its nut cover followed by removing the nut and lastly removing the arm itself. The first step is to disconnect the windshield wiper linkage by removing the bolt and after that separate the linkage. The next action is to remove the wiper motor by unscrewing the bolts before removing the motor unit from the engine. The procedure for installing the system follows the exact opposite steps used for removal.

OEM 2000 Ford F-150 Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2000 Ford F-150 Wiper Motor, Front
Part Number: YL3Z-17508-AB
Product Specifications
- Other Name: Windscreen Wiper; Windshield Wiper Motor, Front; Wiper Linkage; Motor & Linkage; Front Motor
- Position: Front
- Replaced by: YL3Z-17566-A
- Base No.: 17508
- Item Weight: 8.80 Pounds
- Item Dimensions: 39.5 x 9.1 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL3Z-17508-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2000 Ford F-150 Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford F-150 Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford F-150 Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford F-150 Wiper Motor Parts Questions & Experts Answers

Q: How to service the wiper motor on 2000 Ford F-150?
A: Service of the wiper motor requires starting with the pivot arm by putting off its nut cover followed by removing the nut and lastly removing the arm itself. The first step is to disconnect the windshield wiper linkage by removing the bolt and after that separate the linkage. The next action is to remove the wiper motor by unscrewing the bolts before removing the motor unit from the engine. The procedure for installing the system follows the exact opposite steps used for removal.