My Garage
Cart

OEM 2000 Ford F-150 Wiper Blade

Windshield Wiper Blade
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Blade found

  • 2000 Ford F-150 Wiper Blade Diagram - XL3Z-17528-AA
    View related parts

    2000 Ford F-150 Wiper Blade, Front Part Number: XL3Z-17528-AA

    $5.68 MSRP: $7.73
    You Save: $2.05 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Blade Assembly - Wiper; Windshield Wiper Blade, Front; Front Blade
    • Position: Front
    • Base No.: 17528
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 0.8 x 1.8 x 21.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XL3Z-17528-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2000 Ford F-150 Submodels:
    • Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2000 Ford F-150 Wiper Blade

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford F-150 Wiper Blade available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford F-150 Wiper Blade as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford F-150 Wiper Blade Parts Q&A

  • Q: How to service and repair windshield wiper blades on 2000 Ford F-150?
    A: The starting point for wiper blade service and repair requires winding the wipers then placing them into the parked position. Check the specifications for the distance between right-hand (RH) windshield wiper blade center and bottom glass. Then verify the left-hand (LH) windshield wiper blade measurement. Proceed to remove the windshield wiper pivot arm after checking that one of the distance measurements does not meet the specifications. Separate the pivot arm from its position by removing the nut through the cover. You should remove the windshield wiper pivot arm before repositioning it according to needed specifications. The last step requires securing the windshield wiper pivot arm nuts tightly.