FordParts
My Garage
My Account
Cart
OEM 2000 Ford Mustang Sway Bar Bushing
Stabilizer Sway Bar Bushing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Sway Bar Bushings found
Product Specifications- Other Name: Insulator Assembly; Rear Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing; Bushings
- Position: Rear
- Base No.: 5493
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.2 x 3.2 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XR3Z-5493-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Bush; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings
- Manufacturer Note: Insulator, SOHC
- Position: Front
- Base No.: 5493
- Item Weight: 0.20 Pounds
- Item Dimensions: 7.3 x 3.2 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XR3Z-5493-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Bush; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings
- Manufacturer Note: Insulator, automatic transmission
- Position: Front
- Base No.: 5493
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.4 x 3.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XR3Z-5493-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Bush; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings
- Manufacturer Note: Insulator, manual transmission
- Position: Front
- Replaces: F4ZZ-5493-D
- Base No.: 5493
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.5 x 3.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XR3Z-5493-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Mustang Sway Bar Bushing
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Mustang Sway Bar Bushing available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Mustang Sway Bar Bushing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Mustang Sway Bar Bushing Parts Q&A
- Q: How to Service the Sway Bar Bushing on 2000 Ford Mustang?A: Service procedures for the sway bar bushing should begin with raising the vehicle to a hoist and removing all wheel and tire assemblies. The front sway bar (5482) links (5K483) should be disconnected by removing their bushings and nuts followed by throwing out the nuts while rotating the sway bar to release the links. The service starts by taking away nuts before you remove the sway bar bracket (5486) and sway bar mounting bracket adapter (5B482). Cut the sway bar insulators (5493) which are attached to the bar. Before installation, users should apply Rubber Suspension Insulator Lube E25Y-19553-A or an equivalent product which meets Ford specification ESF-M99B112-A to all components of the front sway bar as well as the sway bar bushing internal diameter. Reverse the removal steps to carry out the installation using parts with the same number or equivalent alternatives accompanied by correct torque rates while reassembling all components.