FordParts
My Garage
My Account
Cart
OEM 2000 Ford Mustang Axle Shaft
Car Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Axle Shafts found
Product Specifications- Other Name: Shaft Assembly; CV Axle Assembly, Rear Left, Rear Right; CV Axle Assembly; GSP CV Axle; Axle Shaft
- Position: Rear Passenger Side
- Replaces: 1R3Z-4K138-AA, 2R3Z-4K138-AA
- Item Weight: 35.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2R3Z-4K138-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Mustang Axle Shafts, Rear Part Number: XR3Z-4234-BA
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear; Axle Shaft Assembly; Axle Shaft
- Manufacturer Note: without ABS
- Position: Rear
- Base No.: 4234
- Item Weight: 24.00 Pounds
- Item Dimensions: 40.8 x 8.6 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XR3Z-4234-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Mustang Axle Shafts, Rear Part Number: XR3Z-4234-AA
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear; Axle Shaft Assembly; Axle Shaft
- Manufacturer Note: with ABS
- Position: Rear
- Base No.: 4234
- Item Weight: 19.30 Pounds
- Item Dimensions: 39.3 x 8.4 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XR3Z-4234-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Mustang Axle Shaft
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Mustang Axle Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Mustang Axle Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Mustang Axle Shaft Parts Q&A
- Q: How to service and repair the axle shaft on 2000 Ford Mustang?A: Vehicle axle shaft repairs start by lifting the car and placing support under it before removing both wheels along with their tires then discarding the brake disk. To perform lubricant drainage start by removing the differential housing cover followed by extracting the differential pinion shaft through the initial removal of its lock bolt. Experts need to slowly push the axle shaft inward before taking out the U-washer since failure to do so might damage the rubber O-ring in the axle shaft groove. The following step requires removal of the rear brake anti-lock sensor with proper caution before removing the axle shaft. To install the wheel bearing oil seal applicants need to use Premium Long-Life Grease XG-1-C or equivalent products that comply with Ford specification ESA-M1C75-B while applying the lubricant only on the seal lip to avoid damage during installation. To install the axle shaft with the U-washer, position the U-washer inside the side gear counterbore correctly. Threadlock and Sealer EOAZ-19554-AA or equivalent WSK-M2G351-A5 per Ford specifications should be used to coat the new lock bolt threads if the existing pinion shaft lock bolt is not available for installation. The repair process ends with replacement of the differential housing cover followed by lubricant filling in the rear axle after you reassemble the system through rear brake anti-lock sensor and brake installation before you lower the vehicle.
Related 2000 Ford Mustang Parts
2000 Ford Mustang Coil Springs
2000 Ford Mustang Coil Spring Insulator
2000 Ford Mustang Control Arm Bracket
2000 Ford Mustang Control Arm Bushing
2000 Ford Mustang Crossmember Bushing
2000 Ford Mustang Differential Mount
2000 Ford Mustang Shock And Strut Mount
2000 Ford Mustang Sway Bar Bushing
2000 Ford Mustang Sway Bar Kit
2000 Ford Mustang Sway Bar Link
2000 Ford Mustang Trailing Arm
2000 Ford Mustang Trailing Arm Bushing