FordParts
My Garage
My Account
Cart
OEM 2000 Ford Mustang Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Water Pumps found
2000 Ford Mustang Water Pump Part Number: 3L3Z-8501-CA
$49.93 MSRP: $80.55You Save: $30.62 (39%)Ships in 1 Business DayProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Manufacturer Note: With M30 Hub
- Replaced by: 5L3Z-8501-AC
- Replaces: 5R3Z-8501-A, 5L2Z-8501-A, 1L2Z-8501-BB, F7UZ-8501-CA, F8AZ-8501-AA, PW-470, PW-387, YW7Z-8501-AA, AR3Z-8501-A, F4AZ-8501-A, AL3Z-8501-B, PW-499, YR3Z-8501-AB, YC2Z-8501-BA, PW-466, XC2Z-8501-BA
- Base No.: 8501
- Item Weight: 5.60 Pounds
- Item Dimensions: 6.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-8501-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Mustang Water Pump Part Number: 3R3Z-8501-A
$77.06 MSRP: $122.36You Save: $45.30 (38%)Product Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 4U7Z-8501-A, 4U7Z-8501-B, 3R3Z-8501-BB
- Base No.: 8501
- Item Weight: 6.10 Pounds
- Item Dimensions: 9.0 x 8.6 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3R3Z-8501-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Mustang Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Mustang Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Mustang Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Mustang Water Pump Parts Q&A
- Q: How to service and repair the water pump on 2000 Ford Mustang?A: The water pump service begins with draining engine coolant to a level beneath the pump location. First remove the Power Steering pump pulley from the water pump by losing its bolts then taking off the water pump pulley bolts and pulley. Begin next step by removing both bolts and nuts from the PS bracket. The lower radiator hose must be disconnected from the water pump followed by removal of the camshaft position sensor. You should put the water heater outlet tube assembly to the side after unscrewing its bolt. Start by removing the water pump through removal of its stud followed by four bolts and four nuts. The installer must examine gasket sealing surfaces for cleanliness before putting in place. The installation requires reversing removal steps while using new gaskets and properly tightening the water pump stud along with its bolts and nuts according to sequence. Finally, fill the cooling system.