OEM 2000 Ford Ranger Cruise Control Servo

2000 Ford Ranger Cruise Control Servo Parts Questions & Experts Answers

• Q: How to service and repair the cruise control servo on 2000 Ford Ranger?

  A: You must start the repair process on the cruise control servo by turning off the battery ground cable connection while observing preventative measures against static electrical discharge damage to electronic modules. Begin by removing the speed control actuator cable through its counterclockwise turning motion after pushing the cap tab inside while disconnecting the speed control servo electrical connector. Start the spacing procedure by removing the speed control servo by taking out its bracket bolt. First install the speed control servo bracket bolt before placing the cable ball slug into the slot on the servo rotor. Squeeze the speed control actuator cable gently while monitoring its tautness toward the throttle body end so you can check the routing by following the white indicator mark. Put the cap into the servo body ducts before turning the cap clockwise to activate the servo locking mechanism. Reinstall the ground cable that powers the battery in conclusion. After battery connection and disconnection the vehicle will possibly demonstrate unusual drive behavior because it needs to relearn its adaptive strategy so you need to drive a minimum distance of 16 km (10 miles).