FordParts
My Garage
My Account
Cart
OEM 2000 Ford Ranger Fender
Wheel Fender- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Fenders found
2000 Ford Ranger Fender, Front Driver Side Part Number: 1L5Z-16006-BA
$395.39 MSRP: $580.60You Save: $185.21 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Fender Assembly - Front; Fender, Front Left
- Manufacturer Note: L.H., w/o wheel lip moulding
- Position: Front Driver Side
- Replaces: F87Z-16006-AA
- Base No.: 16006
- Item Weight: 13.80 Pounds
- Item Dimensions: 6.8 x 55.8 x 34.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-16006-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Ranger Fender, Front Driver Side Part Number: 1L5Z-16006-CA
$273.84 MSRP: $375.71You Save: $101.87 (28%)Product Specifications- Other Name: Fender Assembly - Front; Fender, Front Left
- Manufacturer Note: L.H., , w/ wheel lip moulding
- Position: Front Driver Side
- Replaces: F87Z-16006-BA
- Base No.: 16006
- Item Weight: 14.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-16006-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Fender Assembly - Front; Fender, Front Right
- Manufacturer Note: R.H., w/o wheel lip moulding
- Position: Front Passenger Side
- Base No.: 16005
- Item Weight: 19.30 Pounds
- Item Dimensions: 53.6 x 34.3 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-16005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Manufacturer Note: R.H., , w/ wheel lip moulding
- Position: Front Passenger Side
- Base No.: 16005
- Item Weight: 19.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-16005-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Ranger Fender
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Ranger Fender available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Ranger Fender as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Ranger Fender Parts Q&A
- Q: How to remove and install the front fender on 2000 Ford Ranger?A: The front fender can be removed after uninstalling both front bumper and parking lamp assembly and radiator opening cover using pushpin removal. The stone deflector becomes accessible after removing its corresponding pushpin and extracting the deflector. The wheel splash guard should be detached while removing electrical connector locators from the splash shield and disconnecting vacuum lines from the vacuum storage reservoir on the RH splash shield before removing it by unscrewing screws, pushpin and bolts. The next step is to remove the front fender cowl side sound absorber and the lower front fender to rocker panel bolt while safely storing any front fender spacer(s) that are present. Unlock the front door to gain access to the front fender bolt which can be removed together with the front fender radiator support brace bolt. The radio grille opening panel reinforcement needs installation then removal of its four bolts which are situated at the front position. Proceed with the bolt removal from the RH front fender speed control servo when it exists. Move forward with removal of the front fender by unthreading its bolts. First install the front fender bolts and afterward and only if equipped reinstall the speed control servo on the RH front fender with its survival bolt. Begin by fastening the bolts that secure the radiator grille opening panel reinforcement and finally install the bolt between the front fender to radiator support brace. The front-door opening permits installation of the front fender bolt while the lower front fender gets bolted onto the rocker panel after potential use of up to two fender spacers per side. Before attaching the front fender cowl side sound absorber the technician must secure electrical connector locators to their correct locations and reconnect vacuum lines to the vacuum storage reservoir on RH splash shield. Reinstall the wheel splash guard to begin while also fastening the stone guard through its pushpin. Conclusion of the process includes installing pushpins in the radiator opening cover and the parking lamp assembly followed by reattachment of the front bumper.