How to service and repair the throttle body on 2000 Ford Ranger?

Service and repair operations on the throttle body must start by disconnecting the battery ground cable. First remove the accelerator control splash shield before extracting both accelerator cable and speed control cable components when present. You should remove the accelerator cable bracket after all its bolts are removed followed by the bracket's departure. Follow the step to detach the engine air cleaner intake tube and duct. First disconnect connections of both Throttle Position (TP) sensor and Idle Air Control (IAC) valve before removing the crankcase ventilation tube. The removal process starts with unbolted four bolts attaching the throttle body before gently separating the throttle body with its Throttle Body (TB) gasket. As the final step disconnect the tube used to return evaporative emissions. The step for installation requires doing the opposite of what was done during removal.

OEM 2000 Ford Ranger Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Throttle Bodies found

View related parts
2000 Ford Ranger Throttle Body
Part Number: F87Z-9E926-BD
Product Specifications
- Other Name: Body Assembly - Carburetor
- Base No.: 9E926
- Item Weight: 3.00 Pounds
- Item Dimensions: 7.7 x 6.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-9E926-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Ranger Submodels:
- Splash, XL, XLT | 4 Cyl 2.5 L GAS
View related parts
2000 Ford Ranger Throttle Body
Part Number: F8TZ-9E926-AA
Product Specifications
- Other Name: Housing - Throttle Plate
- Manufacturer Note: OHV
- Base No.: 9E926
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8TZ-9E926-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Ranger Submodels:
- Splash, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2000 Ford Ranger Throttle Body
Part Number: F87Z-9E926-DA
Product Specifications
- Other Name: Body Assembly - Carburetor; Body Assembly - Carburettor Throttle
- Base No.: 9E926
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-9E926-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Ranger Submodels:
- Edge, Splash, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2000 Ford Ranger Throttle Body

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Ranger Throttle Body available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Ranger Throttle Body as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Ranger Throttle Body Parts Questions & Experts Answers

Q: How to service and repair the throttle body on 2000 Ford Ranger?
A: Service and repair operations on the throttle body must start by disconnecting the battery ground cable. First remove the accelerator control splash shield before extracting both accelerator cable and speed control cable components when present. You should remove the accelerator cable bracket after all its bolts are removed followed by the bracket's departure. Follow the step to detach the engine air cleaner intake tube and duct. First disconnect connections of both Throttle Position (TP) sensor and Idle Air Control (IAC) valve before removing the crankcase ventilation tube. The removal process starts with unbolted four bolts attaching the throttle body before gently separating the throttle body with its Throttle Body (TB) gasket. As the final step disconnect the tube used to return evaporative emissions. The step for installation requires doing the opposite of what was done during removal.