How to service the rear bumper cover on a wagon on 2000 Ford Taurus?

Service of the wagon's rear bumper cover begins with taking out the load space trim panel. You should begin by removing the LH rear bumper cover to rear quarter panel nuts then progress to removing the RH rear bumper cover panel nuts followed by the rear bumper cover nuts. Support the raised vehicle afterward you should remove splash shield screws then set aside both LH and RH splash shields to access the rear bumper cover attachment bolts. Begin by disconnecting the drain tube followed by removing the two rear bumper cover to rear quarter panel nuts and the pin-type retainers. The rear bumper cover installation requires separating the connector tied to the rear side marker light while removing the screws until the cover fully detaches from the body. When installing the new cover reverse all the steps used during removal.

OEM 2000 Ford Taurus Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Bumpers found

View related parts
2000 Ford Taurus Bumper Cover, Rear Part Number: 2F1Z-17K835-CA
$100.60 MSRP: $136.89
You Save: $36.29 (27%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: YF1Z-17K835-BB
- Base No.: 17K835
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17K835-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2000 Ford Taurus Impact Bar, Front Part Number: 1F1Z-17757-AA
$88.99 MSRP: $123.11
You Save: $34.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front; Bar
- Position: Front
- Replaces: YF1Z-17757-AB
- Base No.: 17757
- Item Weight: 14.50 Pounds
- Item Dimensions: 53.7 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2000 Ford Taurus Impact Bar, Rear Part Number: YF1Z-17906-AB
$63.01 MSRP: $85.75
You Save: $22.74 (27%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Manufacturer Note: Steel
- Position: Rear
- Replaces: XF1Z-17906-AA
- Base No.: 17906
- Item Weight: 15.20 Pounds
- Item Dimensions: 5.8 x 5.6 x 48.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-17906-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2000 Ford Taurus Bumper Cover, Front Part Number: 2F1Z-17D957-BA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match, It may also be necessary to order any color 2F1Z 8200 grille & paint to match
- Position: Front
- Replaces: YF1Z-17D957-BA
- Base No.: 17D957
- Item Weight: 12.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17D957-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2000 Ford Taurus Bumper Cover, Rear Part Number: 2F1Z-17K835-DA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: YF1Z-17K835-BA
- Base No.: 17K835
- Item Weight: 10.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17K835-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
- SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2000 Ford Taurus Impact Bar, Rear Part Number: YF1Z-17906-BA
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Position: Rear
- Base No.: 17906
- Item Weight: 14.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-17906-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
- GL, LX, SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2000 Ford Taurus Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Taurus Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Taurus Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Taurus Bumper Parts Q&A

Q: How to service the rear bumper cover on a wagon on 2000 Ford Taurus?
A: Service of the wagon's rear bumper cover begins with taking out the load space trim panel. You should begin by removing the LH rear bumper cover to rear quarter panel nuts then progress to removing the RH rear bumper cover panel nuts followed by the rear bumper cover nuts. Support the raised vehicle afterward you should remove splash shield screws then set aside both LH and RH splash shields to access the rear bumper cover attachment bolts. Begin by disconnecting the drain tube followed by removing the two rear bumper cover to rear quarter panel nuts and the pin-type retainers. The rear bumper cover installation requires separating the connector tied to the rear side marker light while removing the screws until the cover fully detaches from the body. When installing the new cover reverse all the steps used during removal.