How to service and repair the front bumper cover on Ford Taurus?

You must start the front bumper cover service and repair operation by taking out the headlamp assemblies. Set the vehicle on a hoist that maintains neutral gear position. First remove the 5 pin-type retainers from the chin spoiler then proceed to uninstall the air dam after unscrewing its 7 air dam screws and 3 air dam bolts. Installation demands proper torque of 9 Nm (80 lb-in) on all components. Begin the front bumper cover service by first disassembling the LH and RH front fender splash shields that require removal of 8 screws alongside 2 pin-type retainers. You must detach two front bumper cover bolts that exist on each edge before reinstalling while following a torque value of 5 Nm (44 lb-in). Weld fixings for the radiator grille need removal first, then the front bumper cover's 2 pin-type retainers and 4 bolts should be removed before completing installation by tightening the bolts to 5 Nm (44 lb-in). The bumper cover requires pushing its clip toward the edge of the fender to separate it from its mounting position. Return all tools and complete the installation process in exactly the opposite order used during disassembly.

How to remove and install the front bumper cover on all on Ford Taurus?

The first step for front bumper cover removal on all vehicles requires headlamps removal and vehicle support through lifting. The first step includes unsettling five pin-type retainers located under the chin spoiler and next the air dam can be separated by removing seven screws and three bolts. Unscrew thirteen screws from the splash shields on LH and RH front fenders then dismiss their two pin-type retainers before proceeding to remove the front splash shields. The front bumper cover bolts need to come out while also taking out pin-type retainers and the radiator grille specifically on the Taurus model. The Bumper cover on Sable models needs to be unclipped from the support of the radiator grille opening while fog lamp electrical connectors should only be detached if present. Finish the process by taking out four front bumper cover bolts while directing the bumper cover clip outboard to detach it from the fender before completely removing the front bumper cover. The installation process requires following the opposite steps used for removal.

OEM Ford Taurus Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

31 Bumpers found

View related parts
Ford Taurus Impact Bar, Rear Part Number: AG1Z-17906-A
$249.86 MSRP: $366.90
You Save: $117.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Manufacturer Note: To Be Used For Servicing All Prior Models Along With Isolator AA5Z-17E855-A
- Position: Rear
- Replaces: 8A5Z-17906-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bumper Cover, Rear Part Number: DG1Z-17K835-AAPTM
$530.67 MSRP: $779.25
You Save: $248.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bumper Cover, Rear Part Number: DG1Z-17K835-GAPTM
$687.51 MSRP: $818.46
You Save: $130.95 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Lower Deflector, Front Part Number: AG1Z-17D957-CC
$122.29 MSRP: $178.00
You Save: $55.71 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Spoiler, Front Lower
- Manufacturer Note: BLACK
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bumper Cover, Front Part Number: 8G1Z-17D957-AAPTM
$152.87 MSRP: $235.92
You Save: $83.05 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bumper Cover, Rear Part Number: AG1Z-17K835-MAPTM
$564.71 MSRP: $836.60
You Save: $271.89 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: AG1Z-17K835-BAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bumper Cover, Rear Part Number: AG1Z-17K835-LAPTM
$488.22 MSRP: $716.92
You Save: $228.70 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: AG1Z-17K835-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bumper Cover, Rear Part Number: AG1Z-17K835-NAPTM
$655.85 MSRP: $824.65
You Save: $168.80 (21%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: AG1Z-17K835-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bumper Cover, Rear Part Number: 8G1Z-17K835-AAPTM
$255.12 MSRP: $397.38
You Save: $142.26 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Impact Bar, Front Part Number: 1F1Z-17757-AA
$88.99 MSRP: $123.11
You Save: $34.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front; Bar
- Position: Front
- Replaces: YF1Z-17757-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2007 Ford Taurus | G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Bumper Cover, Front Part Number: DG1Z-17D957-AAPTM
$686.53 MSRP: $756.09
You Save: $69.56 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Prime, Paint To Match - Reference TSB 03-10-1
- Position: Front
- Replaces: DG1Z-17D957-BAPTM, DG1Z-17D957-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bumper Cover, Front Part Number: DG1Z-17D957-HAPTM
$439.12 MSRP: $644.81
You Save: $205.69 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Manufacturer Note: Prime, Paint To Match - Reference TSB 03-10-1
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bumper Cover, Rear Part Number: 2F1Z-17K835-DA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: YF1Z-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Taurus | SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Bumper Cover, Front Part Number: 4F1Z-17D957-DA
Product Specifications
- Other Name: Bumper - Cover
- Manufacturer Note: Paint to match, No license plate brkt used.
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Taurus | LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Isolator, Rear Part Number: F6DZ-17906-AA
Product Specifications
- Other Name: Bumper Assembly - Rear
- Manufacturer Note: Isolator, Isolator,exc SHO-ONLY TO BE USED WITH ORIGINAL BUMPER REINFORCMENT, BEFORE 12/9/98
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | G, GL, LX, SE, SE Comfort | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Bumper Cover Part Number: F6DZ-17K835-A
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match , exc. SHO
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | G, GL, LX, SE, SE Comfort | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Bumper Cover Part Number: F8DZ-17D957-BA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match, exc. SHO
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Ford Taurus | LX, SE, SE Comfort | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Bumper Cover Part Number: F8DZ-17K835-AA
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | GL, LX, SE, SE Comfort | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Impact Bar, Rear Part Number: YF1Z-17906-BA
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Ford Taurus | GL, LX, SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Impact Bar, Front Part Number: 8G1Z-17757-A
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: 5G1Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS

| Page 1 of 2 |Next >

1-20 of 31 Results

Ford Taurus Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Taurus Bumper Parts and Q&A

Bumper Cover, Front
4F1Z-17D957-DA
Q: How to service and repair the front bumper cover on Ford Taurus?
A:
You must start the front bumper cover service and repair operation by taking out the headlamp assemblies. Set the vehicle on a hoist that maintains neutral gear position. First remove the 5 pin-type retainers from the chin spoiler then proceed to uninstall the air dam after unscrewing its 7 air dam screws and 3 air dam bolts. Installation demands proper torque of 9 Nm (80 lb-in) on all components. Begin the front bumper cover service by first disassembling the LH and RH front fender splash shields that require removal of 8 screws alongside 2 pin-type retainers. You must detach two front bumper cover bolts that exist on each edge before reinstalling while following a torque value of 5 Nm (44 lb-in). Weld fixings for the radiator grille need removal first, then the front bumper cover's 2 pin-type retainers and 4 bolts should be removed before completing installation by tightening the bolts to 5 Nm (44 lb-in). The bumper cover requires pushing its clip toward the edge of the fender to separate it from its mounting position. Return all tools and complete the installation process in exactly the opposite order used during disassembly.
Impact Bar, Front
1F1Z-17757-AA
Q: How to remove and install the front bumper cover on all on Ford Taurus?
A:
The first step for front bumper cover removal on all vehicles requires headlamps removal and vehicle support through lifting. The first step includes unsettling five pin-type retainers located under the chin spoiler and next the air dam can be separated by removing seven screws and three bolts. Unscrew thirteen screws from the splash shields on LH and RH front fenders then dismiss their two pin-type retainers before proceeding to remove the front splash shields. The front bumper cover bolts need to come out while also taking out pin-type retainers and the radiator grille specifically on the Taurus model. The Bumper cover on Sable models needs to be unclipped from the support of the radiator grille opening while fog lamp electrical connectors should only be detached if present. Finish the process by taking out four front bumper cover bolts while directing the bumper cover clip outboard to detach it from the fender before completely removing the front bumper cover. The installation process requires following the opposite steps used for removal.