How to service and repair the turn signal switch on 2000 Ford Taurus?

The service and repair of the turn signal switch starts with disconnecting the battery ground cable. The ignition key needs to be inserted into the lock cylinder while the RUN position is selected followed by pushing the tab with a punch and then pulling out the cylinder. Start by detaching the tilt wheel handle then unscrewing and separating the upper and lower steering shrouds. Unscrew the multifunction switch before disconnecting its electrical connectors then removing the switch. The final step for installation consists of performing the opposite procedure to removal.

OEM 2000 Ford Taurus Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2000 Ford Taurus Multifunction Switch
Part Number: YF1Z-13K359-AAB
$77.00 MSRP: $104.79
You Save: $27.79 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Direction Indicator; Combination Switch; Multi Purpose Switch
- Replaces: YF1Z-13K359-AAA
- Base No.: 13K359
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.3 x 4.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-13K359-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2000 Ford Taurus Turn Signal Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Taurus Turn Signal Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Taurus Turn Signal Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Taurus Turn Signal Switch Parts Questions & Experts Answers

Q: How to service and repair the turn signal switch on 2000 Ford Taurus?
A: The service and repair of the turn signal switch starts with disconnecting the battery ground cable. The ignition key needs to be inserted into the lock cylinder while the RUN position is selected followed by pushing the tab with a punch and then pulling out the cylinder. Start by detaching the tilt wheel handle then unscrewing and separating the upper and lower steering shrouds. Unscrew the multifunction switch before disconnecting its electrical connectors then removing the switch. The final step for installation consists of performing the opposite procedure to removal.