How to service and repair the A/C Hose for auxiliary climate control on 2000 Ford Windstar?

Service and repair procedures for the HVAC hose/line of auxiliary climate control start with disconnecting the vehicle battery. The Refrigerant Discharging and Recovery Procedure should be executed at this point. Raise and support the vehicle while you remove both fittings of the suction accumulator/drier. Start by detaching the auxiliary A/C line with its peanut fitting and continuing with the removal of the spring lock coupling between the condenser and evaporator line at the A/C evaporator core position. The line operation at the condenser can be disconnected by first removing the nut and then separating the fitting. Installation starts by following the reverse order of removal steps and applying PAG Compressor Oil YN-12-C, F7AZ-19589-DA, or an equivalent that fulfills Ford specification WSH-M1C231-B to the O-ring seal before installation.

OEM 2000 Ford Windstar A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 A/C Hoses found

View related parts
2000 Ford Windstar Lower Pressure Hose
Part Number: XF2Z-19867-BB
$32.43 MSRP: $44.86
You Save: $12.43 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: A/C tube asy , attaches from accumulator to main evaporator output (suction line)
- Base No.: 19867
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.7 x 13.7 x 23.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-19867-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar High Pressure Hose
Part Number: XF2Z-19D850-AH
$276.05 MSRP: $381.89
You Save: $105.84 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Replaces: YF-2613, XF2Z-19D850-CG, XF2Z-19D850-AG
- Base No.: 19D850
- Item Weight: 5.20 Pounds
- Item Dimensions: 11.6 x 8.1 x 39.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-19D850-AH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Rear A/C Line
Part Number: XF2Z-19837-BC
$76.64 MSRP: $106.02
You Save: $29.38 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: #1 in illustration, includes orifice tube, less convoluted sleeve
- Base No.: 19837
- Item Weight: 0.30 Pounds
- Item Dimensions: 1.0 x 3.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-19837-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar High Pressure Hose
Part Number: XF2Z-19D850-BA
$49.14 MSRP: $67.98
You Save: $18.84 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly; Tube - Compressor To Manifold
- Manufacturer Note: Manifold & tube asy. , w/o auxiliary A/C
- Base No.: 19D850
- Item Weight: 5.50 Pounds
- Item Dimensions: 33.9 x 8.8 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-19D850-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Front A/C Line
Part Number: XF2Z-19837-AC
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Base No.: 19837
- Item Weight: 1.50 Pounds
- Item Dimensions: 12.9 x 22.6 x 42.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-19837-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar High Pressure Hose
Part Number: XF2Z19D850DA
Product Specifications
- Other Name: Tube Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly; Tube - Compressor To Manifold
- Item Weight: 5.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z19D850DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
2000 Ford Windstar A/C Line
Part Number: XF2Z-19867-AA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: A/C aux evaporator tube asy - smaller tube that attaches from underbody tube to auxiliary evaporator core, with high output (auxiliary) heater/AC
- Base No.: 19867
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.1 x 5.3 x 18.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-19867-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Front A/C Line
Part Number: XF2Z-19837-CA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: #2 in illustration, condenser to evaporator, without aux
- Base No.: 19837
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.5 x 13.7 x 40.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-19837-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar A/C Line
Part Number: XF2Z-19835-AA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: Tube asy , a/c auxiliary evaporator inlet , w/ high output (auxiliary) a/c,attaches from underbody a/c supply line to small auxiliary evaporator jumper line
- Base No.: 19835
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-19835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2000 Ford Windstar A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Windstar A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Windstar A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Windstar A/C Hose Parts Questions & Experts Answers

Q: How to service and repair the A/C Hose for auxiliary climate control on 2000 Ford Windstar?
A: Service and repair procedures for the HVAC hose/line of auxiliary climate control start with disconnecting the vehicle battery. The Refrigerant Discharging and Recovery Procedure should be executed at this point. Raise and support the vehicle while you remove both fittings of the suction accumulator/drier. Start by detaching the auxiliary A/C line with its peanut fitting and continuing with the removal of the spring lock coupling between the condenser and evaporator line at the A/C evaporator core position. The line operation at the condenser can be disconnected by first removing the nut and then separating the fitting. Installation starts by following the reverse order of removal steps and applying PAG Compressor Oil YN-12-C, F7AZ-19589-DA, or an equivalent that fulfills Ford specification WSH-M1C231-B to the O-ring seal before installation.