How to service and repair the coolant reservoir on 2000 Ford Windstar?

The coolant servicing requires a drainage procedure beneath the degas bottle. The service technician must first disconnect the lower degas bottle supply hose and the overflow hose and throttle body heater water return hose. Begin the operation by removing the bolts securing the degas bottle after which you should take it out. Follow the opposite order of the removal sequence to install while performing fluid infusion to the cooling system. The mixing of Standard (green) Coolant with Extended life Coolant (orange) should always be avoided.

OEM 2000 Ford Windstar Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2000 Ford Windstar Reservoir Assembly
Part Number: 2F2Z-8A080-AA
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
- Replaces: XF2Z-8A080-AA
- Base No.: 8A080
- Item Weight: 4.30 Pounds
- Item Dimensions: 17.9 x 12.5 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F2Z-8A080-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2000 Ford Windstar Coolant Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Windstar Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Windstar Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Windstar Coolant Reservoir Parts Questions & Experts Answers

Q: How to service and repair the coolant reservoir on 2000 Ford Windstar?
A: The coolant servicing requires a drainage procedure beneath the degas bottle. The service technician must first disconnect the lower degas bottle supply hose and the overflow hose and throttle body heater water return hose. Begin the operation by removing the bolts securing the degas bottle after which you should take it out. Follow the opposite order of the removal sequence to install while performing fluid infusion to the cooling system. The mixing of Standard (green) Coolant with Extended life Coolant (orange) should always be avoided.