FordParts
My Garage
My Account
Cart
OEM 2000 Ford Windstar Motor And Transmission Mount
Motor and Trans Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Motor And Transmission Mounts found
2000 Ford Windstar Front Mount Part Number: XF2Z-6038-BA
$27.22 MSRP: $37.04You Save: $9.82 (27%)Product Specifications- Other Name: Insulator Assembly; Engine Mount Isolator, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Insulator; Mount Insulator
- Position: Front
- Base No.: 6038
- Item Weight: 5.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Windstar Front Mount, Driver Side Part Number: XF2Z-6038-AA
Product Specifications- Other Name: Insulator Assembly; Engine Mount Isolator, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Insulator
- Position: Front Driver Side
- Base No.: 6038
- Item Weight: 5.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Windstar Transmission Mount Part Number: F5OY-6F063-A
Product Specifications- Other Name: Insulator Assembly; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator
- Base No.: 6F063
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.2 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5OY-6F063-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Windstar Rear Mount Part Number: XF2Z-6068-BA
Product Specifications- Other Name: Insulator Assembly - Engine; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Insulator; Mount Insulator; Insulator Assembly - Engine Support
- Manufacturer Note: Engine rear support
- Base No.: 6068
- Item Weight: 4.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Insulator Assembly - Engine; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Insulator; Insulator Assembly - Engine Support
- Manufacturer Note: RH - round insulator with bolt at each end
- Position: Passenger Side
- Base No.: 6068
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-6068-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Insulator Assembly; Automatic Transmission Mount; Engine Mount Torque Strut; Bracket; Transfer Case Mount; Motor Mount; Mount Insulator; Insulator; Transmission Mount
- Manufacturer Note: Engine/trans support
- Base No.: 6068
- Item Weight: 2.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F58Z-6F063-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Windstar Motor And Transmission Mount
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Windstar Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Windstar Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Windstar Motor And Transmission Mount Parts Q&A
- Q: How to Service and Repair the Motor and Transmission Mount on 2000 Ford Windstar?A: Service and repair operations on the transmission mount must begin by disabling the air suspension switch if present in your system. Following vehicle elevation and support you should remove the left-hand wheel along with its tire. A high lift transmission jack needs to be placed underneath the transaxle yet the engine should not rise too high since this could result in internal parts separating within the tripod CV joint leading to halfshaft failure. Before removing the transaxle support insulator the unit needs to be elevated by a particular method. Start by taking off the bolts and nut which holds the engine and transmission support insulator in place before raising the transaxle to detach the insulator. Remove the rear engine support bracket from the next procedure step. Start by bolt-fastening the rear engine support bracket then follow with installation of the engine and transaxle support insulator before loosely tightening its bolts. Position the mount properly by lowering the transaxle then tighten all bolts and nut before performing the final bolt and nut torques. To complete the procedure remove the transmission jack and reinstall the tire and wheel on the left side of the vehicle while enabling the air suspension if it exists.