FordParts
My Garage
My Account
Cart
OEM 2001 Ford Windstar Motor And Transmission Mount
Motor and Trans Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Motor And Transmission Mounts found
Product Specifications- Other Name: Insulator Assembly - Engine Support; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Insulator
- Position: Rear Passenger Side
- Replaces: 1F2Z-6068-AA
- Base No.: 6068
- Item Weight: 4.90 Pounds
- Item Dimensions: 8.1 x 4.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Windstar Front Mount, Driver Side Part Number: XF2Z-6038-AA
Product Specifications- Other Name: Insulator Assembly; Engine Mount Isolator, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Insulator
- Position: Front Driver Side
- Base No.: 6038
- Item Weight: 5.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Windstar Transmission Mount Part Number: F5OY-6F063-A
Product Specifications- Other Name: Insulator Assembly; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator
- Base No.: 6F063
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.2 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5OY-6F063-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Windstar Motor And Transmission Mount
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Windstar Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Windstar Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Windstar Motor And Transmission Mount Parts Q&A
- Q: How to Service and Repair the Motor and Transmission Mount on 2001 Ford Windstar?A: Begin servicing the transmission mount through this procedure by lifting the vehicle and taking off the left hand wheel along with its tire. Install a high lift transmission jack beneath the transaxle position. First remove the engine and transaxle upper support insulator nut and proceed to take out the engine and transaxle upper support bracket bolts and lose the bracket. The service and repair of the transmission mount starts by removing both insulator bolts and the insulator. Install the procedure with the engine and transaxle support insulator by setting it into position then fastening the bolts. Begin by reattaching the engine and transaxle upper support bracket followed by its bolts then install the engine and transaxle upper support insulator nut. When finished with the high lift transmission jack proceed to put on the LH wheel together with the tire while lowering the vehicle.