Other Name: Bulb; Turn Signal & Parking Light Bulb, Front; Side Marker Light; Headlight Bulbs; Car Bulbs; Parking Lamp Bulb; Signal Bulb; Exterior Bulbs
Position: Front
Replaces: F5DZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: YU5Z-13466-AD
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Lincoln Continental Submodels:
Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Lincoln Continental Submodels:
Anniversary, Base, Diamond Anniversary, Executive, Signature, Spinnaker Edition | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Lincoln Continental Submodels:
Anniversary, Base, Diamond Anniversary, Signature, Spinnaker Edition | 8 Cyl 4.6 L GAS
2000 Lincoln Continental Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Continental Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Continental Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln Continental Headlight Bulb Parts Q&A
Q: How to service the headlight bulb on 2000 Lincoln Continental?
A: Service of the headlamp bulb begins with taking out the assembly. Use a counterclockwise rotation of the headlamp bulb cover to separate it then detach the electrical cable from the bulb. Begin by turning the retaining ring to the counterclockwise direction and then extract the headlamp bulb by pulling it directly out with rocking movements. The halogen bulb requires handling by its base only because its internal pressure makes it sensitive to breaking. Replace the bulb only shortly before installation to stop contaminants from entering the headlamp equipment which could degrade operational capability. Install the new bulb following removal procedures until the alignment pins of the headlamp assembly match their correct holes. When reconnecting the battery you should know that the vehicle will show unexpected driving behavior before it relearns its adaptive system so you must drive at least 16 km (10 mi). You must confirm that the new bulbs are certified Ford specifications because non-approved bulbs might trigger problems with the lighting control module (LCM).