Other Name: Bulb; Turn Signal & Parking Light Bulb, Front; Side Marker Light; Headlight Bulbs; Car Bulbs; Parking Lamp Bulb; Signal Bulb; Exterior Bulbs
Position: Front
Replaces: F5DZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: YU5Z-13466-AD
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Lincoln Continental Submodels:
Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Lincoln Continental Submodels:
Anniversary, Base, Diamond Anniversary, Executive, Signature, Spinnaker Edition | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Lincoln Continental Submodels:
Anniversary, Base, Diamond Anniversary, Signature, Spinnaker Edition | 8 Cyl 4.6 L GAS
2001 Lincoln Continental Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln Continental Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln Continental Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Lincoln Continental Headlight Bulb Parts Questions & Experts Answers
Q: How to Safely and Correctly Service the Headlight Bulb on 2001 Lincoln Continental?
A: Service the headlamp bulb with caution since the pressure in the halogen bulb must be handled carefully because it can shatter when the glass envelope receives a scratch or if the bulb falls by touch only its base part and do not handle the glass envelope directly. Installation time for the new bulb needs to be delayed until shortly before mounting to stop contaminants from damaging the headlamp performance. The process starts with taking out the headlamp assembly followed by counterclockwise rotation of the headlamp bulb cover to detach it. Unlock the electrical connector which supplies power to the headlamp bulb before turning the retaining ring to the left and removing it. To remove the headlamp bulb use gentle rocking movements for pulling it straight out. To install the lamp assembly reverse the demounting procedure by placing the assembly in its correct position while inserting alignment pins into the specified holes along the reinforcement ribs. The driver should never operate vehicles with headlights enabled without bulbs installed and must use bulbs that match Ford specifications to prevent Lighting Control Module (LCM) malfunctions and low beam complications.