FordParts
My Garage
My Account
Cart
OEM 2000 Lincoln LS Oil Cooler
Engine Oil Cooler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Oil Coolers found
2000 Lincoln LS Oil Cooler Part Number: XW4Z-6A642-AA
Product Specifications- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Manufacturer Note: For Coolant Hoses To Oil Cooler, Refer To 8286 Lower Radiator Hose
- Base No.: 6A642
- Item Weight: 3.60 Pounds
- Item Dimensions: 8.3 x 6.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-6A642-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln LS Oil Cooler Part Number: 2W4Z-6A642-BB
Product Specifications- Other Name: Oil Cooler Assembly
- Base No.: 6A642
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.3 x 6.4 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2W4Z-6A642-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln LS Oil Cooler
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln LS Oil Cooler available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln LS Oil Cooler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln LS Oil Cooler Parts Q&A
- Q: How to service and repair the oil cooler on 2000 Lincoln LS?A: A correct service and repair procedure for the oil cooler begins with engine cooling system drainage. Begin by supporting the vehicle under elevation then separate the hoses from the oil cooler followed by removing the bolt which secures the oil cooler. Check the gasket for damage before dismissing it for replacement. Ultra-cleaning both surfaces and the gasket must happen before installation. Attach the oil cooler together with its gasket and screw in the bolt until the locating pin finds its stop position. The procedure ends with reattachment of the oil cooler hoses followed by lowering the vehicle and performing engine cooling system filling.