How to service the rear bumper cover on 2000 Lincoln Navigator?

A technician should start servicing the rear bumper cover of the Navigator by removing upper pin-type retainers which fasten the bumper cover. The service procedure starts with the removal of rear bumper cover to inner splash shield screws on each side followed by three rear bumper cover to quarter panel bracket bolts on each side as well as two rear bumper cover to quarter panel nuts on each side. Sensors of parking aid systems need disconnecting from their harness connector in vehicles that have this feature. You can remove the rear bumper cover by giving upward traction to each of the four corners. The installation procedure for the new bumper cover consists of performing the reverse steps followed by accurate component transfers.

OEM 2000 Lincoln Navigator Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Bumpers found

View related parts
2000 Lincoln Navigator Bumper Cover
Part Number: YL7Z-17D957-AA
$235.12 MSRP: $325.27
You Save: $90.15 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: F85Z-17D957-AC
- Base No.: 17D957
- Item Weight: 26.80 Pounds
- Item Dimensions: 85.1 x 33.6 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL7Z-17D957-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2000 Lincoln Navigator Impact Bar
Part Number: F85Z-17757-AA
$285.97 MSRP: $392.36
You Save: $106.39 (28%)
ADD TO CART
Product Specifications
- Other Name: Bumper
- Base No.: 17757
- Item Weight: 31.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2000 Lincoln Navigator Bumper Cover
Part Number: YL7Z-17K835-BA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Primed-paint to match, w/reverse park aid
- Base No.: 17K835
- Item Weight: 16.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL7Z-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2000 Lincoln Navigator Bumper Cover
Part Number: YL7Z-17K835-AA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Primed-paint to match, w/o reverse park aid
- Base No.: 17K835
- Item Weight: 16.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL7Z-17K835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2000 Lincoln Navigator Bumper, Rear
Part Number: YL7Z-17906-AA
Product Specifications
- Other Name: Bumper Assembly - Rear
- Position: Rear
- Base No.: 17906
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL7Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS

2000 Lincoln Navigator Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Navigator Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Navigator Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Lincoln Navigator Bumper Parts Questions & Experts Answers

Q: How to service the rear bumper cover on 2000 Lincoln Navigator?
A: A technician should start servicing the rear bumper cover of the Navigator by removing upper pin-type retainers which fasten the bumper cover. The service procedure starts with the removal of rear bumper cover to inner splash shield screws on each side followed by three rear bumper cover to quarter panel bracket bolts on each side as well as two rear bumper cover to quarter panel nuts on each side. Sensors of parking aid systems need disconnecting from their harness connector in vehicles that have this feature. You can remove the rear bumper cover by giving upward traction to each of the four corners. The installation procedure for the new bumper cover consists of performing the reverse steps followed by accurate component transfers.