How to service and repair the rear bumper cover on 2001 Lincoln Navigator?

The repair service of the Navigator's rear bumper cover starts with removing its pin-type retainers on the upper section. Start by removing the screw holding the rear bumper cover to inner splash shield on both sides and proceed with the three left and right side bumper cover to quarter panel bracket bolts and the two side bumper cover to quarter panel nuts. Service vehicles with parking aid requires removal of the parking aid sensor harness connector. You should lift upwards on the rear bumper cover corners to detach it. Perform the installation process backward from removal steps while properly transferring all involved components during installation of the new bumper cover.

OEM 2001 Lincoln Navigator Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Bumpers found

View related parts
2001 Lincoln Navigator Impact Bar Part Number: F85Z-17757-AA
$285.97 MSRP: $392.36
You Save: $106.39 (28%)
ADD TO CART
Product Specifications
- Other Name: Bumper
- Base No.: 17757
- Item Weight: 31.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2001 Lincoln Navigator Bumper Cover Part Number: YL7Z-17D957-AA
$235.12 MSRP: $325.27
You Save: $90.15 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: F85Z-17D957-AC
- Base No.: 17D957
- Item Weight: 26.80 Pounds
- Item Dimensions: 85.1 x 33.6 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL7Z-17D957-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2001 Lincoln Navigator Bumper Cover Part Number: YL7Z-17K835-BA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Primed-paint to match, w/reverse park aid
- Base No.: 17K835
- Item Weight: 16.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL7Z-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2001 Lincoln Navigator Bumper Cover Part Number: YL7Z-17K835-AA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Primed-paint to match, w/o reverse park aid
- Base No.: 17K835
- Item Weight: 16.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL7Z-17K835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2001 Lincoln Navigator Bumper, Rear Part Number: YL7Z-17906-AA
Product Specifications
- Other Name: Bumper Assembly - Rear
- Position: Rear
- Base No.: 17906
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL7Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS

2001 Lincoln Navigator Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln Navigator Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln Navigator Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Lincoln Navigator Bumper Parts Q&A

Q: How to service and repair the rear bumper cover on 2001 Lincoln Navigator?
A: The repair service of the Navigator's rear bumper cover starts with removing its pin-type retainers on the upper section. Start by removing the screw holding the rear bumper cover to inner splash shield on both sides and proceed with the three left and right side bumper cover to quarter panel bracket bolts and the two side bumper cover to quarter panel nuts. Service vehicles with parking aid requires removal of the parking aid sensor harness connector. You should lift upwards on the rear bumper cover corners to detach it. Perform the installation process backward from removal steps while properly transferring all involved components during installation of the new bumper cover.