How to service the right-hand exhaust manifold on 2000 Lincoln Navigator?

Service of the right-hand exhaust manifold starts with grounding the battery cable while raising and supporting the vehicle. Start the process by removing two nuts from the Y pipe and then lower the vehicle partially. Begin by removing both nuts securing the Y pipe, then lower the vehicle partially. After that detach the right-hand front wheel assembly along with the tire. Before removing the exhaust manifold the starter cable harness bolt needs detachment and cable positioning away from the area followed by unfastening the manifold and gasket together with its eight nuts. Installation requires the same steps that reverse removal steps and incorporation of a fresh gasket during the process.

OEM 2000 Lincoln Navigator Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Exhaust Manifolds found

View related parts
2000 Lincoln Navigator Exhaust Manifold, Passenger Side
Part Number: XL3Z-9430-GA
$69.50 MSRP: $101.17
You Save: $31.67 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 13.90 Pounds
- Item Dimensions: 9.1 x 7.9 x 21.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-9430-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2000 Lincoln Navigator Exhaust Manifold, Driver Side
Part Number: 2L1Z-9431-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH. Includes EGR fitting XL3E-9F485-AA, With EGR valve
- Position: Driver Side
- Replaces: XL3Z-9431-FA
- Base No.: 9430B
- Item Weight: 13.30 Pounds
- Item Dimensions: 9.2 x 7.1 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-9431-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2000 Lincoln Navigator Exhaust Manifold, Driver Side
Part Number: XL1Z-9431-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Manufacturer Note: LH - Includes XL3Z-9F485-AA, DOHC
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 13.50 Pounds
- Item Dimensions: 21.1 x 8.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL1Z-9431-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
- Base | 8 Cyl 5.4 L GAS

2000 Lincoln Navigator Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Navigator Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Navigator Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Lincoln Navigator Exhaust Manifold Parts Questions & Experts Answers

Q: How to service the right-hand exhaust manifold on 2000 Lincoln Navigator?
A: Service of the right-hand exhaust manifold starts with grounding the battery cable while raising and supporting the vehicle. Start the process by removing two nuts from the Y pipe and then lower the vehicle partially. Begin by removing both nuts securing the Y pipe, then lower the vehicle partially. After that detach the right-hand front wheel assembly along with the tire. Before removing the exhaust manifold the starter cable harness bolt needs detachment and cable positioning away from the area followed by unfastening the manifold and gasket together with its eight nuts. Installation requires the same steps that reverse removal steps and incorporation of a fresh gasket during the process.