FordParts
My Garage
My Account
Cart
OEM 2000 Lincoln Navigator Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Parking Brake Cables found
2000 Lincoln Navigator Rear Cable, Passenger Side Part Number: XL1Z-2A635-AC
$45.48 MSRP: $62.91You Save: $17.43 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable (brake rear) - RH - from 9/18/98 - includes the connector 2853 to 2A635
- Position: Passenger Side
- Item Weight: 3.80 Pounds
- Item Dimensions: 3.4 x 21.7 x 21.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL1Z-2A635-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable (brake rear) - LH - from 9/18/98
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 1.50 Pounds
- Item Dimensions: 0.1 x 14.8 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL1Z-2A635-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln Navigator Parking Brake Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Navigator Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Navigator Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln Navigator Parking Brake Cable Parts Q&A
- Q: How to service and repair the LH rear parking brake cable and conduit on 2000 Lincoln Navigator?A: Service or repair the LH rear parking brake cable and conduit only when the parking brake control is fully released and the system tension is relieved by pulling the front parking brake cable and conduit followed by inserting an appropriate retainer. Air suspension on vehicles can be prevented from changing air spring pressure when lifting or towing by switching off the RH kick panel button before the operation. Support the vehicle and start by disconnecting the RH parking brake rear cable and conduit from the LH parking brake rear cable and conduit at the parking brake cable equalizer. Use the parking brake cable clip compression method to uninstall the LH parking brake rear cable and conduit from the parking brake cable bracket when removing the screw. Compression of the retainer enables the release of the parking brake rear cable and conduit from the rear disc brake caliper anchor plate while unclipping both components from the parking brake lever. The installation process of this system consists of performing the removal steps in reverse order.