FordParts
My Garage
My Account
Cart
OEM 2001 Lincoln Navigator Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Parking Brake Cables found
2001 Lincoln Navigator Rear Cable, Passenger Side Part Number: XL1Z-2A635-AC
$45.48 MSRP: $62.91You Save: $17.43 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable (brake rear) - RH - from 9/18/98 - includes the connector 2853 to 2A635
- Position: Passenger Side
- Item Weight: 3.80 Pounds
- Item Dimensions: 3.4 x 21.7 x 21.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL1Z-2A635-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable (brake rear) - LH - from 9/18/98
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 1.50 Pounds
- Item Dimensions: 0.1 x 14.8 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL1Z-2A635-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Lincoln Navigator Parking Brake Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln Navigator Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln Navigator Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Lincoln Navigator Parking Brake Cable Parts Q&A
- Q: How to service and repair the LH rear parking brake cable and conduit on 2001 Lincoln Navigator?A: Before working on the LH rear parking brake cable and conduit operators must fully press the parking brake control to relieve system tension. Insert a proper retention method after pulling the front parking brake cable together with its conduit. You must switch off the air suspension control in the right-hand kick panel section before vehicle hoisting or lifting because unexpected air springs could shift the vehicle's position. The technician should lift the vehicle before isolating the RH parking brake rear cable and conduit from the LH parking brake rear cable and conduit at their parking brake cable equalizer. Remove the LH parking brake rear cable and conduit from the parking brake cable bracket by compressing the parking brake cable clip while unscrewing the fastener. Through retainer compression one can release the parking brake rear cable and conduit from the rear disc brake caliper anchor plate. Then unclip the parking brake rear cable and conduit from the parking brake lever. The installation process requires following the exact reverse steps of the removal process.